Updates and fixes to support GCC for Linux
Signed-off-by: Steve Pham <82231385+spham-amzn@users.noreply.github.com>
Co-authored-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
Added supervariants to the precompiled DiffuseProbeGrid shaders for the NumRaysPerProbe values
Signed-off-by: dmcdiarmid-ly <63674186+dmcdiarmid-ly@users.noreply.github.com>
These changes have the added benefit of simplifying some of the serialization code. MaterialSourceDataSerializer is no longer needed, as its main purpose was to pass the MaterialTypeSourceData down to the MaterialPropertyValueSerializer.
Before, the JSON serialization system gave a lot of data flexibility because it did best-effort conversions, like allowing a float to be loaded as an int for example. But now the material serialization code doesn't know target data type, so it has to assume the data type based on what's in the .material file, and then the MaterialAsset will convert the data to the appropriate type later when Finalize() is called.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
In some cases it may be acceptable to do non-const things in a const function as long as it is only manipulating internal data, and the public facing API returns the same values as before. But in this case, the IsFinalized function is a public facing API that would have a different result after GetPropertyValues was called.
I also updated a couple other minor things from code review feedback.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
I found a mistake where MaterialAssetCreator needs to clear the raw data when configured to finalize the material asset.
Since MaterialSourceData no longer relies on the material type source file at all, I was able to change MaterialSourceDataTest to avoid saving the source data to disk.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
I made MaterialAsset::Finalize private so I could add some parameters specifically for MaterialAssetCreator to use. Now MaterialAssetCreator::Begin has an option to finalize the material or not.
Moved MaterialAssetCreatorCommon::ValidateDataType to MaterialPropertyDescriptor as "ValidateMaterialPropertyDataType" so that MaterialAsset::Finalize could use it too
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
Before, the material builder was loading the MaterialTypeAsset and doing some processing with it, but was avoiding declaring job dependencies that would cause reprocessing lots of assets when a shader or .materialtype file changes. Reading the asset data isn't safe when not declaring a job dependency (or when declaring a weak job dependency like OrderOnce which is the case here). This caused to several known bugs.
The main change here is it no longer loads the MaterialTypeAsset at all; all other changes flow from there.
The biggest changes (when deferred material processing is enabled) are ...
1) MaterialSourceData no longer loads MaterialTypeAsset. All it really needs is to determine whether a string is an image file reference or an enum value, which is easy to do by just looking for the "." for the extension.
2) MaterialAssetCreator no longer produces a finalized material asset. It no longer uses MaterialAssetCreatorCommon because that only produces a non-finalized MaterialAsset, which has very different needs for the SetPropertyValue function. (We could consider merging MaterialAssetCreatorCommon into MaterialTypeAssetCreator since that's the only subclass at this point). And it doesn't do any validation against the properties layout since that can be done at runtime.
3) Moved processing of enum property values from MaterialSourceData to MaterialAsset::Finalize (this was the only thing being done in the builder that actually needed to read the material type asset data).
Also...
- Updated the MaterialAsset class mostly to clarify and formalize the two different modes it can be in: whether it is finalized or not.
- Merged the separate "IncludeMaterialPropertyNames" registry settings from MaterialConverterSystemComponent and MaterialBuilder into one "FinalizeMaterialAssets" setting used for both.
- Removed MaterialSourceData::ApplyVersionUpdates. Now the flow of data is the same regardless of whether the materials are finalized by the AP or at runtime. Version updates are always applied on the MaterialAsset.
- Added a validation check to MaterialTypeAssetCreator ensuring that once a property is renamed, the old name can never be used again for a new property. This assumption was already made previously, but not formalized, in that Material::FindPropertyIndex does not expect every caller to provide a version number for the material property name, also the material asset's list of raw property names was never versioned. The only way for this to be a safe assumption is to prevent reuse of old names.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
The issue was because the preset reload was only happened in CreateJobs but not ProcessJobs. But these two functions might be called from different AssetBuilder. The fix is to add preset reload for Processjobs too.
There was another change to add debug device name for streaming image.
Signed-off-by: Qing Tao <55564570+VickyAtAZ@users.noreply.github.com>
* Support to add a different PSO cache per vendor/driver version. Also added support to have a differnt cache for Warp
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Added a way to reset PSO cache for everyone
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Fix tabbing for one line which is failing validation
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Templates/Restricted upgrade/fixes:
Fixed template storage format: templates now only store true relative paths and no longer save "origin" paths and "optional" has been removed, it was never used.
Upgraded all templates to new standard
Template system now correctly handles child objects: Child objects no longer have to specify restricted they inherit from parent
Restricted now operates at the object level and makes no assumptions about parent
Restricted templates can now be combined and seperated on creation
ly_get_list_relative_filename has been deprecated for o3de_pal_dir
All Gems/Projects/Templates updated to use new code
Signed-off-by: byrcolin <byrcolin@amazon.com>
The CriticalAssetsCompiled event can be handled to detect when the
AssetProcessor has finished processing Critical Assets
Also with the new event, an audit has been performed over all the
locations where the AssetCatalogEventBus OnCatalogLoaded event was being
handle to make sure it was the proper event to use.
If the handler was actually examing the enumerating over the full
catalog or querying all assets within the catalog, then it was a proper
use.
For handlers that were interested in a particular asset it was not
Moreover added implementations of `OnCatalogAssetChanged` and
`OnCatalogAssetAdded` to the FileTagComponent and the MaterialViewportComponent.
Any applications which uses the AtomToolsApplication
class(MaterialEditor, AtomSampleViewerStandalone,
ShaderMangementConsole) now signals a "CriticalAssetsCompiled" lifecycle
event as well as loads the "assetcatalog.xml" if it exists.
The Launcher application signals the "CrticalAssetsCompiled" event and
reloads the "assetcatalog.xml" for the ${project}.GameLauncher and
${project}.ServerLauncher in Launcher.cpp
Finally the Editor signals the "CriticalAssetsCompiled" and reloads the
"assetcatalog.xml" in CryEdit.cpp
resolves#6093
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removed chatty profile markers.
These 4 markers removed tens of thousands of events, which reduced an example capture from 1685 ms to 1614 ms and made it far more readable.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Restored one marker
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Average incoming skin influences when multiple vertices have been welded. This is one option which will average out the weights even if two welded vertices have differing boneIds, but we probably also need to add the influences earlier in the process and enforce a process where the vertices do not get welded if they have influences with differing boneIds
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Move skin influences from MeshBuilderSkinningInfo to the vertex attribute layers so they are considered when choosing which vertices can be welded and so they are not duplicated when compatible vertices have been welded
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Updating unit tests
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Remove unused functions
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Update based on feedback from burelc
Signed-off-by: Tommy Walton <waltont@amazon.com>
- Remove trait AZ_TRAIT_DISABLE_FAILED_ATOM_RPI_TESTS
- Add template specialization for ConstantsData::SetConstant<Color> and ConstantsData::GetConstant<Color>
- Remove trait AZ_TRAIT_DISABLE_FAILED_ATOM_RPI_TESTS from source code
- Fix ConstantsData::SetConstantArray<bool> to pass unit test SetConstant_GetConstant_FalsePackedInGarbage_Bool on Linux, cause by an unwanted optimization (comments describe the situation). This will make this behavior consistent across platforms
Signed-off-by: Steve Pham <82231385+spham-amzn@users.noreply.github.com>
Make View::SortFinalizedDrawLists use child jobs so they don't block the worker thread from doing other work while waiting.
Implement a TaskGraph version of the view draw list sort.
Fix a misc bug where the scene was waiting on a task graph event twice and so hanging.
Enable MeshFeatureProcessor::Simulate to be able to use jobs when no parent job is specified because the parent job is a task.
Signed-off-by: rgba16f <82187279+rgba16f@users.noreply.github.com>
* Multiple bug fixes
- Handle Dx12 validation error related to multiple resource transitions happening on the same resource.
- Added API to better query for image/buffer views associated with an attachment.
- Address possible serialization issues by usage of size_t
- Reduced number of Descriptor sets allowed per SRG Pool in order to reduce descriptor waste.
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Addressed minor feedback
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Fix compile issues
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Missed a few other fixes
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
Jobification of the sort saves 0.7ms/frame on the HighInstanceTest on my pc.
Make MeshFeatureProcessor update of the mesh cull bounds part of the job work rather than part of the simulate work. This saves 0.1ms/frame on the HighInstanceTest
Signed-off-by: rgba16f <82187279+rgba16f@users.noreply.github.com>
* Adding clearcoat to linear transform cosine lights (quad and polygon lights). Also fixed several warnings in various places in our shaders.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Fixes from PR review
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Updates from review feedback - pulled out some of the duplicate code into functions. This required some minor restucturing. Ran ASV Area light tests to make sure nothing changed and validated clearcoat was working in a separate project.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* update return type for viewport screen functions
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add tests for AZ::Matrix3x4::CreateFromMatrix4x4 and add TransformPoint to Matrix3x4
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* update NDC -> Ndc
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* updates following review feedback
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* updates and improvements following PR feedback
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add forward declaration of Matrix3x4 type
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* update where forward declarations are defined for Matrix3x4
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* Multiple cleanups ( tidy etc. )
Coalesce nested namespaces.
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Multiple cleanups ( tidy etc. ) cntd.
Converted Uuid into POD ( defaulted the constructor )
Add `&/const &` to `for` loops that benefit from their use
Some Qt optimizations ( string ref, prevent container detaches, etc. )
Replace `::bind` in a few places.
Replaced the use of AZ_CRC with AZ_CRC_CE in a few places.
Replace a few `typedef`s with `using`s
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Linux compilation fix.
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Apply review suggestions.
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Fix vs2019 build
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Small clang re-format in StringFunc.cpp
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Apply reviewer's suggestions.
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* improvements to editor selection in the viewport
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* fix issue with being able to select icons that are not showing for entities inside entity containers
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* update comment after review feedback
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* updates to viewport picking code to simplify the api
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add test to replicate near clip intersection issue
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* small tidy-up changes
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* updates to how we perform world to screen and screen to world calculations, added test coverage and some tidy-up
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add some more tests for ViewportInteractionImpl
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* minor tweaks before PR feedback
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* fix typo in fix
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* fix for manipulator test framework tests
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* updates to RPI::View and RenderPipeline after review feedback from VickyAtAZ
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add constexpr to ScreenPoint, ScreenVector and ScreenSize initializing constructors
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add PrintTo functions for Screen* types
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* downgrade error to warning temporarily
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* check incoming view is null
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* remove pragma optimize off
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* Added buffer for material properties of detail mateirals, storing them in a multi-indexed data vector. Updated shader with relevant struct and buffer, but the buffer will need to be moved out of the mateiral SRG to work.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Added buffer for material properties of detail mateirals, storing them in a multi-indexed data vector. Updated shader with relevant struct and buffer, but the buffer will need to be moved out of the mateiral SRG to work.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Added buffer for material properties of detail mateirals, storing them in a multi-indexed data vector. Updated shader with relevant struct and buffer, but the buffer will need to be moved out of the mateiral SRG to work.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* - Moved settings related to the detail material to a partial view srg owned by the terrain gem.
- Added support for base color in detail materials.
- Hooked up basic base color rendering of detail materials.
- Corrected the way the material data was stored.
- Added ref counting for detail materials so they can be released when no longer used.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Added buffer for material properties of detail mateirals, storing them in a multi-indexed data vector. Updated shader with relevant struct and buffer, but the buffer will need to be moved out of the mateiral SRG to work.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* - Moved settings related to the detail material to a partial view srg owned by the terrain gem.
- Added support for base color in detail materials.
- Hooked up basic base color rendering of detail materials.
- Corrected the way the material data was stored.
- Added ref counting for detail materials so they can be released when no longer used.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Detail materials now put textures into bindless array that's accessed in the shader. Shader now pulls all the detail materal information for a single mateiral but does no blending.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Correcting rebase merge problem.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Fix detail roughness fade out with distance.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Adding tests for new MultiIndexedDataVector functions
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Updates to move bindless array to separate SRG
- Exposed BindSrg() in renderpass so it's possible to add additional SRGs to a pass
- Created a TerrainSrg for use by the terrain forward shader
- Moved the bindless array out of the partial view SRG to the TerrainSrg
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Moved more properties out of the view srg to the terrain srg.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Spelling fixes
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Fixing bug where the roughness min/max value were inverted. Also fixed bug where bad data would show for areas where there was no macro material.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Updates from PR review
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Fixing case issues and updating function name due to a recent fix.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* ShaderMetricsSystem spawns a lot of warnings
when run Atom_RPI.Tests
Added @user@ path alias definition.
* When running unit tests, using AZ::Utils::GetProjectPath() will resolve
to something like:
"/data/workspace/o3de/build/linux/External/Atom-9a4d112b/RPI/Code/Cache"
The ShaderMetricSystem.cpp writes to the @user@ folder and the following
runtime error occurs:
"You may not alter data inside the asset cache. Please check the call
stack and consider writing into the source asset folder instead."
"Attempted write location:
/data/workspace/o3de/build/linux/External/Atom-9a4d112b/RPI/Code/Cache/user/shadermetrics.json"
To avoid the error We use AZ::Test::GetEngineRootPath();
Signed-off-by: galibzon <66021303+galibzon@users.noreply.github.com>
I actually tried this approach before and it didn't seem to work the way we needed, but I realized that's because PropertyAssetCtrl wasn't handling missing assets properly. I fixed a few issues there including showing the error button when the asset can't be found, and fixing a broken reference to the error icon file.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
Replaced and removed the CryTimer (gEnv->pTimer). The new TimeSystem is a merger of the current time functionality found in the engine.
* Rename TimeSystemComponent.h/.cpp to TimeSystem.h/.cpp
* Adding New TimeSystem
* remove old timer cvars
* small improvements to the time system.
- updated parts to use the time conversion functions.
- in AdvanceTickDeltaTimes applying t_simulationTickScale is now uses doubles instead of floats.
* Replace gEnv->pTimer / ITimer usages with TimeSystem
* Updating usages of AZ::TimeMs{ 0 } and AZ::TimeUs{ 0 } to AZ::Time::ZeroTimeMs and AZ::Time::ZeroTimeUs
* red code the CryTimer
* using TimeUs instead of TimeMs is some cases + updating usages of old cvars to new
Signed-off-by: amzn-sean <75276488+amzn-sean@users.noreply.github.com>
* The Build Time Stamp of ShaderAsset And
ShaderVariantAsset Should Be Based On
GetTimeUTCMilliSecond()
GetTimeNowMicroseconds() is useful to measure time stamp differences.
GetTimeUTCMilliSecond() is for time stamps based on absolute clock/wall time.
* Updated DiffuseGlobalIllumination precompiled shaders
Co-authored-by: dmcdiar <dmcdiar@amazon.com>
Signed-off-by: galibzon <66021303+galibzon@users.noreply.github.com>
* Add a default fallback image when a StreamingImageAsset fails to load
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Don't release a missing/invalid texture reference in the skybox component. Hold on to the reference so that it can hot-reload
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Don't release a missing/invalid texture reference in the ibl component. Hold on to the reference so that it can hot-reload
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Use a different fallback image depending on the status of the asset. Including a setting to use a friendly image that is less obnoxious for anything that might have been missed in a release build
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Adding the stubbed in fallback textures
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Updated the seedlist for the RPI to include the fallback images. It only needs the default and the missing asset images, since the AP doesn't run in release builds, the asset status will always be unknown, not processing or failed to process, so if an asset is not bundled, it is just missing.
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Switched to GetAssetIdByPath and removed some tabs
Signed-off-by: Tommy Walton <waltont@amazon.com>
The main reason for this is to give consistent results between the AP and Material Editor, where a placholder texture can be used if a texture is missing. Otherwise, you could get a placeholder texture in Material Editor and stale data in the runtime; this inconsistency would be confusing.
As a consequence, it is possible for example that the user could mess up the name of a property in a .material file and not notice the problem because it is now a warning instead of an error. If warnings-as-errors is desirable, you can enable the new "/O3DE/Atom/RPI/MaterialBuilder/WarningsAsErrors" registry setting.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
* fix brute force mesh intersection function
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add test for brute force ray intersection fix
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* refactor tests to remove as much duplication and provide API for future tests if required
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* small updates after review feedback
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* update following review feedback
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* fix for pointer offset
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
Material Editor also warns the user when saving a material that is populated with fallback image references.
Factored out the path strings for the default images to ImateSystemInterface.h.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
Added assetinfo files to make these be processed as "Reference Image" to avoid texture compression that makes the text difficult to read.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
Made it a warning instead of an error when MaterialAssetCreator can't find a texture.
Updated the Material Editor's MaterialDocument class to not elevate warnings to errors.
Material Editor uses new features in TraceRecorder to show a message dialog when warnings are detected so the user is notified of the missing texture.
Next I will work on making MaterialAssetCreator put a "missing" texture in place of the requested one.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
2. Add a higher "launch_ap_timeout" for Mac because launching a newly built/downloaded AP can take a while.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* 1. Add nullptr checks to prevent crashes when non-critical shaders fail to compile.
2. Add a higher "launch_ap_timeout" for Mac because launching a newly built/downloaded AP can take a while.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Fix one more nullptr dereference.
Signed-off-by: amzn-sj <srikkant@amazon.com>
santorac
Steve Pham
Chris Galvan
dmcdiarmid-ly
AMZN-byrcolin
Qing Tao
moudgils
sphrose
lumberyard-employee-dm
michabr
nemerle
Mike Balfour
Nemerle
antonmic
Tommy Walton
rgba16f
Esteban Papp
Ken Pruiksma
bosnichd
Tom Hulton-Harrop
puvvadar
Guthrie Adams
Roman
amzn-sean
galibzon
Alex Peterson
Guthrie Adams
Nicholas Van Sickle
SJ