* Implement sync interval and refresh rate API for RenderViewportWidget
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Measure actual frame timings in the viewport info overlay.
Takes the median of the sum of (frame end - frame begin) to provide more a more representative view of when frames begin and end.
Note: Until VSync is internally supported by the event loop, this will produce nearly identical frame timings as the frame will spend as much time as needed synchronously waiting on a vblank.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Make frame timing per-pipeline, wire up refresh rate info to ViewportContext
Signed-off-by: nvsickle <nvsickle@amazon.com>
* POC: Frame limit pipeline rendering
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Switch Editor tick to every 0ms to allow better tick accumulation behavior
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Move RPISystemComponent to the tick bus, remove tick accumulation logic
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Add `AddToRenderTickAtInterval` to RenderPipeline API
This allows a pipeline to update at a set cadence, instead of rendering every frame or being directly told when to tick.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Make ViewportContext enforce a target framerate
-Adds GetFpsLimit/SetFpsLimit for actively limiting FPS
-Calculates a render tick interval based on vsync and the vps limit and updates the current pipeline
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Add r_fps_limit and ed_inactive_viewport_fps_limit cvars
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Quick null check from a crash I bumped into
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Fix off-by-one on FPS calculation (shouldn't include the not-yet-rendered frame)
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Clarify frame time begin initialization
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Fix TrackView export.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Address some reviewer feedback, revert RPISystem API change, fix CPU profiler.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Add g_simulation_tick_rate
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Address review feedback, make frame limit updates event driven
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Remove timestamp update from ComponentApplication::Tick
Signed-off-by: nvsickle <nvsickle@amazon.com>
- Made the Material and LuaMaterialFunctor classes configurable to report errors or warnings when material properties modify Pipeline State Objects. This is controlled by a new "MaterialPropertyPsoHandling" enum.
- Made the EditorMaterialComponent override PSO handling as Enabled, to prevent warnings when the user is editing material instance property overrides. This requried a new MaterialComponentNotificationBus bus message "OnMaterialInstanceCreated".
- Removed unnecessary GetMaterialPropertyDependencies member from material functor context classes, as this is already available as part of the functor itself.
- Made Material::SetPropertyValue return early when the property value hadn't actually changed. Besides being more efficientn, this prevents unnecessary spamming of the new warning.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
ATOM-16273 Compiling SceneSRG before updating it can cause a gpu crash
Changes include:
1. Removed Scene::SetShaderResourceGroupCallback() function and clean up code which use this function.
2. Moved SceneTimeSrg.azsli to RPI's DefaultSceneSrg folder and setup the constants in RPI::Scene
3. Add AZ::Event for Scene's update srg event which features and update scene srg at proper place
4. UpdateTransformServcie FP to use PrepareSceneSrg event handler.
5. Clean up shaders and srgs used in project templates.
Signed-off-by: Qing Tao <qingtao@amazon.com>
* preparatory work to allow for more viewport integration tests
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* minor grammatical fix
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* fix for missed bus call update
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* Implemented the RFC to allow projects to need to specify the Gems
Projects no longer need to specify CMake Targets to associate a Gem
variant with.
In order to associate a CMake Target with a gem variant a new
`ly_set_gem_variant_to_load` function has been added that maps CMake
Targets -> Gem Variants.
This allows CMake Targets to self describe which gem variants they
desire to build and load
This implementation is backwards compatible:
The `ly_enable_gems` function still accepts the TARGETS and VARIANTS
arguments which it will forward to the new `ly_set_gem_variant_to_load`
function to allow the input Targets to be associated with input Gem
Variants
This changes fixes the issue with gems that are required by an
Application regardless of the Project in use, not replicating it's
"requiredness" to the SDK layout
Fixes#3430
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added an LY_PROJECT_NAME property to the Launcher targets
The `ly_enable_gems_delayed` now command queries the LY_PROJECT_NAME property
associated with each target to determine if the gems being enabled are
match the project the target is associated with.
In this case the target only adds dependencies if the gems is being enabled
without a specific project or if the gems is being enabled for the
matching project.
If the LY_PROJECT_NAME property is not set for target, it indicates the
gems for each project can be added as dependencies to the target.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* The INSTALL step now forwards the LY_PROJECT_NAME property for a target
The Install_common.cmake has been updated to support configuring
TARGET_PROPERTIES into the generated CMakeLists.txt for install targets.
Furthermore the indentation of the generated CMakeLists.txt has been
normalized to help with readability
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updating the Atom_Bootstrap CMakeLists.txt to enable the Atom_Bootstrap Gem
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added a deprecation message to ly_enable_gems when supplying TARGETS and
VARIANTS
Added a define_property call for the LY_PROJECT_NAME target property
Removed the .Builders alias for the PrefabBuilder and renamed the
GEM_MODULE target o PrefabBuilder.Builders.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removed superflous space from AutomatedTesting Gem CMakeLists.txt
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Release build fix for Windows
* Release build fix for Android
* Release build fix for Windows
* Release build fix for Android
* Release build fix for Linux
* Release build fix for Mac
* Release build fix for iOS
Signed-off-by: Steve Pham <spham@amazon.com>
* updates to camera tests to support different delta times and some further tidy-up
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* support variable delta time in mouse move test
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* fix for drift accumulating in the viewport camera
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* fix typo and update how events are stored
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* respond to PR feedback and fix linux and windows build issues
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* fix failing unit tests in camera input
Signed-off-by: hultonha <hultonha@amazon.co.uk>
Atom tools launch or check for the existence of a local server in order to prevent multiple application processes from running. These checks were being done far too late, after initialization and asset processing, leaving time for multiple processes to start before the server or checks. Zombie processes could start and run indefinitely without user interaction because the event loop was being entered despite the request to exit the application early.
These changes launch the server and checks immediately after the application object is constructed and exit before any other work is done if the application will not be run.
Signed-off-by: Guthrie Adams <guthadam@amazon.com>
Appending is standard and preferred but the tabs elide from the end (instead of middle) and cut it off
Signed-off-by: Guthrie Adams <guthadam@amazon.com>
Renamed document related buses and components to have generic names
Added a base document class with default implementation from which other application specific documents can be derived to work with the document system
Added document factory function registration to the document system request bus so that each application can specify the type of document it creates
Updated all comments and messaging to only refer to documents, not materials or material documents
Updated material editor and shader management console to conform to the new buses
This will provide a first pass of a common interface for a document management system that can be shared by multiple applications
Corrected status bar message copy and paste errors
Updated all test scripts to use the new buses
Signed-off-by: Guthrie Adams <guthadam@amazon.com>
fixed problems with status bar messages not appearing
added status bar messages to shader management console
got rid of central widget variable and moved layout to atom tools window base class
Signed-off-by: Guthrie Adams <guthadam@amazon.com>
* make 'should handle' logic customizable
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* updates to get priority function
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* minor comment tweak
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* add typename for struct initializer
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* fix for ensuring while the camera is 'active', events are consumed and not propagated
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* refactor how we decide which priority to repsond to events to
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* also -> only
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* Make Viewport input events fully Qt based.
This should fix an issue with Qt touch event -> mouse event translation in the Editor, and may also fix issues with the Mac Editor and remote desktop (though, lacking the requisite hardware, I can test precisely none of these things personally).
See https://github.com/o3de/o3de/issues/1889
- Adapted LegacyViewportCameraController to use Movement::X & Y (mostly for testing purposes, it's on the slate for being removed soon)
- Moved cursor capture logic from RenderViewportWidget into QtEventToAzInputManager so that it can make sure it generates correct movement deltas
- Removed ViewportMouseCursorRequests::PreviousViewportCursorScreenPosition to have our viewport controllers use our dedicated Movement::X and Y channels instead, which will work in the launcher
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Address review feedback
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Fix Linux build
Signed-off-by: nvsickle <nvsickle@amazon.com>
-This includes implementations of the API for the Editor and Windows, all other platforms will have a 1.0 scale for now
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Updated gem.json for all top-level Gems. All the top level gems now have identical gem.json formats based on the DefautlGem template gem.json. Two additional fields have been added, a type: field and a requirements: field. These fields are for display in Project Mananger. All gem.json files have a default requirements: value of None. Devs are responsible for providing requirements. Gem descriptions and tags have been signed off by developers.
Signed-off-by: Cronin <mikecro@amazon.com>
* Fixed minor formatting issues with RADTelemetry gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to QtForPython gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the Twitch gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to AWSCore gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the AtomTressFX gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the AudioEngineWwise gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the CertificateManager gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removing extra whitespace in summary of CrashReporting gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the CustomAssetExample gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removing extra whitespace in editorPythonBindings gem summary
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the ScriptedEntityTweener gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the Gestures gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removing extra whitetspace in the summary of the GameStateSamples gem
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the ExpressionEvaluation gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the ProjectManager PythonBindings.cpp code to reference the
newer fields in the gem.json files
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updating the Gem and Project templates gem.json files to include the
"type" and the "requirements" field.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the default "requirments" field value to be empty string instead
of "None"
This works better with the ProjectManager GemInfoFromPath function.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Correcting "summary" field name
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added the requirements text to the AudioEngineWwise Gem
This gem requires downloading the Wwise 3rdParty library from AudioKinetic's website
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
Co-authored-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
Co-authored-by: Mike Cronin <58789750+micronAMZN@users.noreply.github.com>
Esteban Papp
Nicholas Van Sickle
santorac
Qing Tao
Guthrie Adams
hultonha
lumberyard-employee-dm
Steve Pham
Chris Galvan
carlitosan
Guthrie Adams
pappeste
moudgils
Dayo Lawal
hultonha
Dayo Lawal