- Prevent P4 thread to run if we cannot detect the P4 command to begin with
- Add a trait to disable calling the parent ComponentApplication::Destroy(), instead calling _exit() to skip the module unloading on exit
Signed-off-by: Steve Pham <spham@amazon.com>
* Initialize the PrefabFocusHandler on context reset, to also cover the case of a new level being created on the welcome screen.
Relax checks/restrictions on refreshes to cover cases where an instance is reused by the Prefab EOS.
Refresh the breadcrumbs when a container is renamed and when a change is propagated to the instances to ensure the correct names are displayed.
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Rename m_isInitialized to m_initialized in PrefabFocusHandler
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Use find_if to detect when a container entity in the focus path has been renamed.
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Renaming and commenting variables in PrefabFocusHandler.
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Undo minor naming change
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Replace lazy initialization and have the UI side initialize the Editor calls in PrefabFocusHandler.
This should prevent issues with focus mode trying to access these interfaces in non-editor applications.
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Add an error message to AP when bad project path
Produce a log error or a dialog box error when the project path for AP
does not have a project.json and is invalid.
Signed-off-by: amzn-phist <52085794+amzn-phist@users.noreply.github.com>
* Fix a failing unit test - AssetProcessorMessages
Adding a check for 'project.json' caused BeforeRun() in a test fixture
to fail. Teardown of the fixture was also broken if the test failed to
fully startup the application manager, so added null checks there.
Added an assert to the fixture's Setup to check the status of BeforeRun().
Added additional settings registry setup to the fixture to make sure the
project path and branch token are configured before BeforeRun() is
called.
Signed-off-by: amzn-phist <52085794+amzn-phist@users.noreply.github.com>
Move the existing Qt Toast Notification QWidgets, EBuses and logic from the GraphCanvas gem into AzQtComponents and AzToolsFramework so they can be re-used.
Signed-off-by: AMZN-alexpete <26804013+AMZN-alexpete@users.noreply.github.com>
* {lyn7065} adding ProcPrefab Prefab::Tempate flag method
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
* updated based on comments
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
* moved validation logic to IsValid()
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
* added more guards around the source string
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
* Added option to reopen if the current level is the same. This contributes to stability for batched tests
Signed-off-by: AMZN-AlexOteiza <aljanru@amazon.co.uk>
* Addressed PR comments
* Addressed PR and cleaned Base level that had an entity by accident
Signed-off-by: AMZN-AlexOteiza <aljanru@amazon.co.uk>
* Cleaned up params
Signed-off-by: AMZN-AlexOteiza <aljanru@amazon.co.uk>
* Addressed PR comments
* Convert resolved wildcard paths to relative path before saving in database.
Warn if file could not be converted to a relative path.
Fix FindWildcardMatches path handling that could result in pathMatch missing the first character
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Handle abs path wildcard dependencies
Remove dependencies outside of scan folder
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Switch to AZ::IO::PathView for abs path check
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Made code a little more clear
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
The test was relying on immediate updates from the prefab system which are now scheduled for a later tick - this reworks the tests to wait for deferred updates before validating state
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Added anchor key parameter to the SettingsRegistry MergeSettings
This allows the MergeSettings function to write JSON data anchored
underneath the supplied anchor path.
Upgraded the SignalNotifiers calls in SetObject, MergeSettings and
MergeSettingsFileInternal to query the type of the merge value at the anchor path
and supply that as the type to the notification event.
Also the the above functions now supply the anchor key root as the
path that was modified instead of assuming root ""
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Fixed whitespace inconsistencies in SettingsRegistryImpl
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added a queue for storing SignalNotifier calls when a thread is
currently signaling.
The queued calls are invoked by that thread after it has signaled it's
current queue of events
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* {lyn7251} Add material component example in Python
adds a AZ::Render::EditorMaterialComponent as an example of how to
override the default material from the scene building pipeline
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
* Only set the cube to a gray material
Skip loading the asset, instead just set the outPrefabAssetPath for the Prefab system to load
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
* stablizing the sub-id of procedural prefab groups
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
The AZ_ENABLE_TRACING check was preventing the Archive System from using the sys_PakPriority value set from the CVar system
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
The EntityOutlinerListModel was violating the QAbstractItemModel contract in a few cases, as reported by `QAbstractItemModelTester`. The important ones causing issues were:
- Entry order was not guaranteed, leading to model indices pointing at invalid data
- Parent/child relationships could be temporarily invalid due to a change I made in EditorEntityModel::RemoveEntity to try to avoid an unnecessary reparent operation - as it turned out, the parent/child data was being cached even for recreated entities and not clearing child data could cause issues
- `EntityOutlinerListModel::ProcessEntityUpdates` was emitting data changed between two indices that didn't necessarily share a parent, which is [undefined behavior](https://doc.qt.io/qt-5/qabstractitemmodel.html#dataChanged)
The other reported issues (that weren't really causing issues with `QTreeView`) were:
- The root index had flags other than `Qt::ItemIsDropEnabled`
- `rowCount` showed all columns as having children
- `parent` showed indices as being parented to a non-0 column
This change introduces fixes for the above issues, namely:
- Reverts my change to `EditorEntityModel::RemoveEntity` to ensure we don't have invalid parent/child references sitting in the cache
- Ensures `EditorEntityModelEntry` child ordering is guaranteed sorted by EntityId, to prevent the `EntityOutlinerListModel` from having indices pointed at invalid data*.
- Fixes various model sanity issues, such as `rowCount` being 0 for indices with a non-0 column
Two unit tests were added to reproduce the invalid behavior and validate the fix: TestCreateFlatHierarchyUndoAndRedoWorks and TestCreateNestedHierarchyUndoAndRedoWorks
This change focuses on correctness over performance. My subjective in-Editor outliner experience is about the same, but it may be worthwhile to expand the test coverage with a benchmarking suite to look into areas for optimization.
*As a rough illustration of the previous child ordering behavior, consider the following entity hierarchy:
```
Root (EID 9999)
|_ Child1 (EID 2)
|_ Child2 (EID 3)
|_ Child3 (EID 4)
```
With an representations like the following pseudocode:
```
// EditorEntityModel representation
EditorEntityModelEntry root;
root.children[0] = 2;
root.children[1] = 3;
root.children[2] = 4;
// EditorOutlinerListModel representation
// row, column, user data (64 bit uint)
child1 = QModelIndex(0, 0, 2)
child2 = QModelIndex(1, 0, 3)
child3 = QModelIndex(2, 0, 4)
```
When removing a child, the `EditorEntityModel` used to do roughly the following:
```
// Swap and pop the last child
int indexToRemove = 0;
swap(root.children[indexToRemove], root.children[root.children.size() - 1]);
root.children.resize(root.children.size() - 1);
model.notifyRemoved(root, indexToRemove); // model removes the row indicated
// Leading to this EditorEntityModel state
root.children[0] = 4;
root.children[1] = 3;
// And this EntityOutlinerListModel state, note that the row indices are swapped from the indices in the backing storage
child2 = QModelIndex(0, 0, 3)
child3 = QModelIndex(1, 0, 4)
```
A QModelIndex having a row that doesn't match its underlying data is undefined behavior, and was the source of an intermittent crash in our `QSortFilterProxyModel` as subsequent updates to the wrong row led to an invalid proxy state.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* fixes some warnings for newer versions of VS2022
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* more warning fixes
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* remove integ test filters from AzTest
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* remove integ test handling from AzTestRunner
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* changes integ tests of gridmate to regular tests and disables failing ones
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* removes the Integ from the EMotionFX tests, but leaves them disabled since they are failing
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* removes the Integ from the HttpRequestor tests and disables it since is not passing
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* changing integ tests for DISABLED, these ones are using files that are not there
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* fixes linux build
gridmate tests that were Integ are now disabled
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* fixes linux warnings
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
nggieber
Steve Pham
Danilo Aimini
Chris Galvan
Vincent Liu
amzn-phist
Alex Peterson
Allen Jackson
rgba16f [Amazon]
AMZN-AlexOteiza
jonawals
amzn-mike
puvvadar
Nicholas Van Sickle
lumberyard-employee-dm
AMZN-nggieber
igarri
Pratik Patel
Yaakuro
Esteban Papp
hultonha