Updates and fixes to support GCC for Linux
Signed-off-by: Steve Pham <82231385+spham-amzn@users.noreply.github.com>
Co-authored-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
These changes have the added benefit of simplifying some of the serialization code. MaterialSourceDataSerializer is no longer needed, as its main purpose was to pass the MaterialTypeSourceData down to the MaterialPropertyValueSerializer.
Before, the JSON serialization system gave a lot of data flexibility because it did best-effort conversions, like allowing a float to be loaded as an int for example. But now the material serialization code doesn't know target data type, so it has to assume the data type based on what's in the .material file, and then the MaterialAsset will convert the data to the appropriate type later when Finalize() is called.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
In some cases it may be acceptable to do non-const things in a const function as long as it is only manipulating internal data, and the public facing API returns the same values as before. But in this case, the IsFinalized function is a public facing API that would have a different result after GetPropertyValues was called.
I also updated a couple other minor things from code review feedback.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
I found a mistake where MaterialAssetCreator needs to clear the raw data when configured to finalize the material asset.
Since MaterialSourceData no longer relies on the material type source file at all, I was able to change MaterialSourceDataTest to avoid saving the source data to disk.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
I made MaterialAsset::Finalize private so I could add some parameters specifically for MaterialAssetCreator to use. Now MaterialAssetCreator::Begin has an option to finalize the material or not.
Moved MaterialAssetCreatorCommon::ValidateDataType to MaterialPropertyDescriptor as "ValidateMaterialPropertyDataType" so that MaterialAsset::Finalize could use it too
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
Before, the material builder was loading the MaterialTypeAsset and doing some processing with it, but was avoiding declaring job dependencies that would cause reprocessing lots of assets when a shader or .materialtype file changes. Reading the asset data isn't safe when not declaring a job dependency (or when declaring a weak job dependency like OrderOnce which is the case here). This caused to several known bugs.
The main change here is it no longer loads the MaterialTypeAsset at all; all other changes flow from there.
The biggest changes (when deferred material processing is enabled) are ...
1) MaterialSourceData no longer loads MaterialTypeAsset. All it really needs is to determine whether a string is an image file reference or an enum value, which is easy to do by just looking for the "." for the extension.
2) MaterialAssetCreator no longer produces a finalized material asset. It no longer uses MaterialAssetCreatorCommon because that only produces a non-finalized MaterialAsset, which has very different needs for the SetPropertyValue function. (We could consider merging MaterialAssetCreatorCommon into MaterialTypeAssetCreator since that's the only subclass at this point). And it doesn't do any validation against the properties layout since that can be done at runtime.
3) Moved processing of enum property values from MaterialSourceData to MaterialAsset::Finalize (this was the only thing being done in the builder that actually needed to read the material type asset data).
Also...
- Updated the MaterialAsset class mostly to clarify and formalize the two different modes it can be in: whether it is finalized or not.
- Merged the separate "IncludeMaterialPropertyNames" registry settings from MaterialConverterSystemComponent and MaterialBuilder into one "FinalizeMaterialAssets" setting used for both.
- Removed MaterialSourceData::ApplyVersionUpdates. Now the flow of data is the same regardless of whether the materials are finalized by the AP or at runtime. Version updates are always applied on the MaterialAsset.
- Added a validation check to MaterialTypeAssetCreator ensuring that once a property is renamed, the old name can never be used again for a new property. This assumption was already made previously, but not formalized, in that Material::FindPropertyIndex does not expect every caller to provide a version number for the material property name, also the material asset's list of raw property names was never versioned. The only way for this to be a safe assumption is to prevent reuse of old names.
Signed-off-by: santorac <55155825+santorac@users.noreply.github.com>
The issue was because the preset reload was only happened in CreateJobs but not ProcessJobs. But these two functions might be called from different AssetBuilder. The fix is to add preset reload for Processjobs too.
There was another change to add debug device name for streaming image.
Signed-off-by: Qing Tao <55564570+VickyAtAZ@users.noreply.github.com>
* Support to add a different PSO cache per vendor/driver version. Also added support to have a differnt cache for Warp
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Added a way to reset PSO cache for everyone
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Fix tabbing for one line which is failing validation
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Removed chatty profile markers.
These 4 markers removed tens of thousands of events, which reduced an example capture from 1685 ms to 1614 ms and made it far more readable.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Restored one marker
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Average incoming skin influences when multiple vertices have been welded. This is one option which will average out the weights even if two welded vertices have differing boneIds, but we probably also need to add the influences earlier in the process and enforce a process where the vertices do not get welded if they have influences with differing boneIds
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Move skin influences from MeshBuilderSkinningInfo to the vertex attribute layers so they are considered when choosing which vertices can be welded and so they are not duplicated when compatible vertices have been welded
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Updating unit tests
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Remove unused functions
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Update based on feedback from burelc
Signed-off-by: Tommy Walton <waltont@amazon.com>
Make View::SortFinalizedDrawLists use child jobs so they don't block the worker thread from doing other work while waiting.
Implement a TaskGraph version of the view draw list sort.
Fix a misc bug where the scene was waiting on a task graph event twice and so hanging.
Enable MeshFeatureProcessor::Simulate to be able to use jobs when no parent job is specified because the parent job is a task.
Signed-off-by: rgba16f <82187279+rgba16f@users.noreply.github.com>
* Multiple bug fixes
- Handle Dx12 validation error related to multiple resource transitions happening on the same resource.
- Added API to better query for image/buffer views associated with an attachment.
- Address possible serialization issues by usage of size_t
- Reduced number of Descriptor sets allowed per SRG Pool in order to reduce descriptor waste.
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Addressed minor feedback
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Fix compile issues
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
* Missed a few other fixes
Signed-off-by: moudgils <47460854+moudgils@users.noreply.github.com>
Jobification of the sort saves 0.7ms/frame on the HighInstanceTest on my pc.
Make MeshFeatureProcessor update of the mesh cull bounds part of the job work rather than part of the simulate work. This saves 0.1ms/frame on the HighInstanceTest
Signed-off-by: rgba16f <82187279+rgba16f@users.noreply.github.com>
* update return type for viewport screen functions
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add tests for AZ::Matrix3x4::CreateFromMatrix4x4 and add TransformPoint to Matrix3x4
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* update NDC -> Ndc
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* updates following review feedback
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* updates and improvements following PR feedback
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* add forward declaration of Matrix3x4 type
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
* update where forward declarations are defined for Matrix3x4
Signed-off-by: Tom Hulton-Harrop <82228511+hultonha@users.noreply.github.com>
Esteban Papp
santorac
Steve Pham
dmcdiarmid-ly
Qing Tao
moudgils
sphrose
michabr
Mike Balfour
antonmic
Tommy Walton
rgba16f
bosnichd
Tom Hulton-Harrop
puvvadar
Guthrie Adams