* Expose shadow bias to component & feature processors. Shadow bias now works more consistently with various near / far shadow planes and caster positions. Bias now also affects esm shadows which helps eliminate acne in certain situations.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Adding jira comment to light configuration serialization version. Improved comment on final adjustment to bias before its sent to the shader.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Hooking up bias to behavior context.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Updating some labels in the directional light and light components to make them more readable and consistent with standards. Removed hard caps on directional light intensity.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
When converting to a light type that doesn't support the currently used photometric unit, the editor component will convert the photometric unit to the universally supported lumen.
Signed-off-by: Ken Pruiksma <pruiksma@amazon.com>
* Final update copyright headers to reference license files at the repo root
Signed-off-by: spham <spham@amazon.com>
* Fix copyright validator unit tests to support the stale O3DE header scenario
Signed-off-by: spham <spham@amazon.com>
Setting hard max values to float max. Also allowing EV100 values hard minimum to be lowest float. Soft min and max will remain the same for a consistent ux, but we will no longer keep people from manually entering really high or low values that are technically fine.
* Fixed organization of the AssetProcessor SourceAssetBrowser
Assets within the Engine Root were grouped under a '/' entry.
That has been fixed to use the relative path within the engine root for
those assets
Assets outside of the Engine Root, but on the same drive were using
absolute paths before. Now there are child entries that navigate up the
directory hierarchy to those asset locations
* Added ly_enable_gems call to Atom gems targets that are required
The DefaultLevel.prefab contains several Atom components, that require
the Atom RHI, RPI, Common_Feature, ShaderBuilder and AtomLyIntegration CommonFeatures
gems to be enabled in order to successfully process in the
AssetProcessor.
* Added ly_enable_gems call to make the Camera gem required in Tools,
Builders and Clients.
This is needed as the DefaultLevel.prefab contains an Editor Camera
Component
* Adding the ly_enable_gem call to make the Maestro gem required
CrySystem currently requires Maestro to be enabled in order to
initialize
* Added ly_enable_gems call to the SceneProcessing gem to make it required
The SceneCore and SceneData libraries that are part of the core engine
Code folder requires the SceneProcessing gem to be enabled in order to
invoke the InitializeDynamicModule hooks in DllMain.cpp in order to
initialize those libraries.
* Fixed bad argument in comment for Prefab CMakeLists.txt
* Fixed Assert in Asset Builders due to the Atom RPI Builder
The Atom RPI Builder was enabling the Asset Catalog for the ScriptAsset a second time
The Atom Feature Common EditorSystemCommonComponent.cpp which also loads
in the AssetBuilder is enabling the Asset Catalog for the ScriptAsset
Added BehaviorContext reflection to the OutputDeviceTransformType enum
to fix the BehaviorContext errors about reflecting a method that returns
such an enum
* Added TypeId output to the JsonDeserializer report message about missing
ClassData
Previously the report callback would indicate that the target type was
missing Serialization class data, but didn't indicate the TypeId of the
target type
* Added support to the ly_enable_gems function to be able to support
0 gems being enabled.
Updated the Install step for CMake to propagate any ly_enable_gems
within a CMakeLists.txt for a target into the generated CMakeLists.txt
that is made for each installed IMPORTED target
* Adding newline to the end of the Camera Gem CMakeLists.txt
* Fixing target TYPE parameter for actual Gem Modules to use the GEM_MODULE tag instead of MODULE
* Reverting change to the DESTINATION directory for the installed CMakeLists.txt to use the relative path to the installed directory
* Adding the Atom_Bootstrap gem as a required gem
The Client and GameLaunchers required the Atom_Bootstrap gem in order to create the NativeWindow
Added Atom_Feature_Common client module as a runtime dependency of the AtomLyIntegration CommonsFeature client module
* Fixed register.py --all-projects-path and --all-gems-path arguments to
NOT register projects or gems that are within a template folder
Fixed reading of old pre-1.0 o3de_manifest.json files where the
"engines" key was a json array
* Changed how the relative target source directory is calculated when that source directroy resides outside of the engine root.
The final dirname component is used with a unique SHA256 has to form a <dirname>-<8 char SHA256> folder for installing files into
* Adding newline to the end of Atom_Bootstrap CMakeLists.txt
* Moving ly_enable_gems variants for Tools and Builders inside of PAL_TRAIT_BUILD_HOST_TOOLS block
* Adding a comment to AWSCore.ResourceMappingTool target to indicate that it is not a GEM_MODULE.
Furthermore it cannot be loaded with the Gem system because the library is in a different directory the executable
* LYN-2537 Moved the Engine and Editor folder to be within the EngineAssets folder
* Fixed Documentation in bootstrap.cfg to correct the path to the user project specific registry file
* Adding a newline to the output of AssetCatalog 'Registering asset..., but type is not set' message
* Updating the AssetProcessorPlatformConfig.setreg Scan Folder to detect
the @ENGINEROOT@/EngineAssets/Engine path for engine runtime assets and
@ENGINEROOT@/EngineAssets/Editor path for engine tool assets
* Updating references to Icons and other assets to account for moving the
Engine and Editor folder under a single EngineAssets folder
* Moving the Engine Settings Registry folder from Engine/Registry -> Registry
* Removed the LY_PROJECT_CMAKE_PATH define as it is not portable to other locations. It is hard coded to the project location that was used for the CMake configuration. Furthermore it paths with backslashes within it are treated as escape characters and not a path separator
* Updated the LyTestTools asset_processor.py script to copy the exclude.filetag from the EngineAssets/Engine directory now
* Fixed Atom Shader Preprocessing when running using an External Project
* Updated the TSGenerateAction.cpp to fix the build error with using a renamed variable
* Updated the Install_Common.cmake ly_setup_others function to install the
EngineAssets directory and the each of the Gem's Assets directory while
maintaining the relative directory structure to the Engine Root
Also updated the install step to install the Registry folder at the
engine root
* Fixed the copying of the Registry folder to be in the install root, instead of under a second 'Registry' folder
* Moving the AssetProcessorPlatformConfig.setreg file over to the Registry folder
* Updated the LyTestTools and C++ code to point that the new location of
the AssetProcessorPlatformConfig.setreg file inside of the Registry
folder
* Renamed Test AssetProcessor*Config.ini files to have the .setreg extension
* Converted the AssetProcessor test setreg files from ini format to json
format using the SerializeContextTools convert-ini command
* Updated the AssetProcessor CMakeLists.txt to copy over the test setreg files to the build folder
* Updated the assetprocessor test file list to point at the renamed AsssetProcessor*Config setreg filenames
* Removed the Output Prefix code from the AssetProcessor. The complexity that it brought to the AP code is not needed, as users can replicate the behavior by just moving there assets underneath a another folder, underneath the scan folder
* Adding back support to read the AssetProcessorPlatformConfig.setreg file from the asset root. This is only needed for C++ UnitTests as they run in an environment where the accessing the Engine Settings Registry is not available
* Updating the Install_common.cmake logic to copy any "Assets" folder to
the install layout.
The Script has also been updated to copy over the "Assets" folder in the
Engine Root to the install layout instead of an "EngineAssets" folder
* Updating References to EngineAssets source asset folder in code to be the Assets source folder
* Moved the Engine Source Asset folder of 'EngineAssets' to a new folder name of 'Assets'. This is inline with the naming scheme we use for Gem asset folders
* Adding the EngineFinder.cmake to the AutomatedTesting project to allow it to work in a project centric manner
* Updating the LyTestTools copy_assets_to_project function to be able to copy assets with folders to the temporary project root
Fixed an issue in LyTestTools where the temporary log directory could have shutil.rmtree being called twice on it leading to an exception which fails an automated test
Updated the asset_procesor_gui_tests_2 AddScanFolder test to not use the
output prefix, but instead place the source asset root into a
subdirectory
* Correct the AssetProcessorPlatformConfig Scan Folders for the EngineAssets directory to point at the Assets directory
* Updated the asset procesor batch dependency test scan folder to point at the 'Assets' folder instead of 'EngineAssets'
Ken Pruiksma
sphrose
Steve Pham
Terry Michaels
lumberyard-employee-dm
mrieggeramzn
mriegger
greerdv
Michael Riegger
rgba16f
alexpete