* Updated Project Settings Screen with preview and fixed moving projects
* Tests for some Project Utils
* Remove old defined consts
* Update UX to use display name when avaliable where appropriate
* Use newPreviewImagePath for temp changing preview.png otherwise use iconPath for preview in UX
* Removed use of newPreviewImagePath in ProjectButton
* Fixed organization of the AssetProcessor SourceAssetBrowser
Assets within the Engine Root were grouped under a '/' entry.
That has been fixed to use the relative path within the engine root for
those assets
Assets outside of the Engine Root, but on the same drive were using
absolute paths before. Now there are child entries that navigate up the
directory hierarchy to those asset locations
* Added ly_enable_gems call to Atom gems targets that are required
The DefaultLevel.prefab contains several Atom components, that require
the Atom RHI, RPI, Common_Feature, ShaderBuilder and AtomLyIntegration CommonFeatures
gems to be enabled in order to successfully process in the
AssetProcessor.
* Added ly_enable_gems call to make the Camera gem required in Tools,
Builders and Clients.
This is needed as the DefaultLevel.prefab contains an Editor Camera
Component
* Adding the ly_enable_gem call to make the Maestro gem required
CrySystem currently requires Maestro to be enabled in order to
initialize
* Added ly_enable_gems call to the SceneProcessing gem to make it required
The SceneCore and SceneData libraries that are part of the core engine
Code folder requires the SceneProcessing gem to be enabled in order to
invoke the InitializeDynamicModule hooks in DllMain.cpp in order to
initialize those libraries.
* Fixed bad argument in comment for Prefab CMakeLists.txt
* Fixed Assert in Asset Builders due to the Atom RPI Builder
The Atom RPI Builder was enabling the Asset Catalog for the ScriptAsset a second time
The Atom Feature Common EditorSystemCommonComponent.cpp which also loads
in the AssetBuilder is enabling the Asset Catalog for the ScriptAsset
Added BehaviorContext reflection to the OutputDeviceTransformType enum
to fix the BehaviorContext errors about reflecting a method that returns
such an enum
* Added TypeId output to the JsonDeserializer report message about missing
ClassData
Previously the report callback would indicate that the target type was
missing Serialization class data, but didn't indicate the TypeId of the
target type
* Added support to the ly_enable_gems function to be able to support
0 gems being enabled.
Updated the Install step for CMake to propagate any ly_enable_gems
within a CMakeLists.txt for a target into the generated CMakeLists.txt
that is made for each installed IMPORTED target
* Adding newline to the end of the Camera Gem CMakeLists.txt
* Fixing target TYPE parameter for actual Gem Modules to use the GEM_MODULE tag instead of MODULE
* Reverting change to the DESTINATION directory for the installed CMakeLists.txt to use the relative path to the installed directory
* Adding the Atom_Bootstrap gem as a required gem
The Client and GameLaunchers required the Atom_Bootstrap gem in order to create the NativeWindow
Added Atom_Feature_Common client module as a runtime dependency of the AtomLyIntegration CommonsFeature client module
* Fixed register.py --all-projects-path and --all-gems-path arguments to
NOT register projects or gems that are within a template folder
Fixed reading of old pre-1.0 o3de_manifest.json files where the
"engines" key was a json array
* Changed how the relative target source directory is calculated when that source directroy resides outside of the engine root.
The final dirname component is used with a unique SHA256 has to form a <dirname>-<8 char SHA256> folder for installing files into
* Adding newline to the end of Atom_Bootstrap CMakeLists.txt
* Moving ly_enable_gems variants for Tools and Builders inside of PAL_TRAIT_BUILD_HOST_TOOLS block
* Adding a comment to AWSCore.ResourceMappingTool target to indicate that it is not a GEM_MODULE.
Furthermore it cannot be loaded with the Gem system because the library is in a different directory the executable
* Fixes issues with project paths w/ trailing slash
When launching AP with a --project-path that has a trailing slash, the
AssetBuilders would get that slash instead of a normalized version.
This would mess up the params sent to AssetBuilders.
* Missed a variable name replacement
* Addresses feedback on code style guidelines
Removed 'auto' keyword in favor of explicit types.
* Fixed crash caused by nesting the same slice twice
If the same slice is nested at multiple levels in the same slice hierarchy, the second conversion would reregister the prefab and crash. Now that case is detected and the slice isn't reconverted.
* Fixed json array patches where multiple elements are removed.
The patches now generate removals from back to front, instead of front to back, so that the indices remain valid as each patch is applied.
* Fixed memory assert on shutdown.
Cleaned up the entity pointers on serialization, so that they no longer leak themselves, their asset references, or anything else within them.
* Added support for remapping entity refs across slice instances.
Slice instances can have components with entity references that have been modified to reference entities in other slice instances, or even in the parent. This change detects and remaps those references so that they work correctly.
Use first offsetMatrix for a bone (there may be multiple) and calculate using offsetOfParent * inverseRootOffset * rootOffset * inverseOffset
(cherry picked from commit a8eae976dda39ad28f9aa235e1e6ba34715ac48a)
# Conflicts:
# Code/Tools/SceneAPI/FbxSceneBuilder/Importers/AssImpTransformImporter.cpp
* Addressed feedback from previous PR
* Change missing entity aliases to be deterministic.
When converting slices, this helps produce the same results on multiple reconversions of the same data.
* Exposed the asset filter callback.
This allows the slice converter to specifically load nested slices as opposed to not loading *any* referenced assets.
* Added support for multiply-nested slice instance conversion.
(cherry picked from commit 86136ddfa6)
* Fix Delete_Real_Readonly_Fails to mark parent directory as read-only as well
Read-only files in Windows cannot be deleted. The previous version of this
code relied on that fact, and would attempt to delete a file even when
`skipReadOnly = true`, relying on the OS to refuse to delete the file if it
is read only. On Linux, it is the writable state of the *directory* that
determines if a file can be deleted or not. This fixes the test to set up
the correct situation where a file deletion would fail.
* Remove excluded items from a vector before iterating over it
Removing items from the `pathMatches` `QStringList` while iterating over it
was causing a segfault on Linux. This change separates out the item removal
from the item iteration, which allows the item iteration loop to use a
range-for loop instead of directly manipulating iterators.
* Remove invalid test that asserts a file's metadata file can have differing file casing
This test is asserting that a given source file and its accompanying
metadata file can have the the same name but differing case. This is really
testing whether or not the underlying filesystem that those files live on
is case sensitive or not. The 99% chance is that users are using the
default filesystem that their host OS gives them, NTFS on Windows, EXT* on
Linux, and APFS on Mac. Even though NTFS is case-insensitive by default,
it [can be configured per-directory](https://devblogs.microsoft.com/commandline/improved-per-directory-case-sensitivity-support-in-wsl/).
APFS as well can be configured to be case-sensitive. For users with case
sensitive filesystems, this test makes no sense. We could extend this test
to inspect the case-sensitivity of the underlying filesystem, but then it
is just testing the filesystem's behavior, which seems out of scope of this
test.
* Use a non-priviliged port for the Asset Processor tests
From https://www.w3.org/Daemon/User/Installation/PrivilegedPorts.html:
> The TCP/IP port numbers below 1024 are special in that normal users are not
> allowed to run servers on them. This is a security feaure, in that if you
> connect to a service on one of these ports you can be fairly sure that you
> have the real thing, and not a fake which some hacker has put up for you.
>
> When you run a server as a test from a non-priviliged account, you will
> normally test it on other ports, such as 2784, 5000, 8001 or 8080.
* Fix for `QDir::rmdir(".")` not working in Linux
Qt uses `::rmdir` to remove directories on Linux. This comes from
[unistd.h](https://pubs.opengroup.org/onlinepubs/007904875/functions/rmdir.html)
The documentation for that function states:
> If the path argument refers to a path whose final component is either dot
> or dot-dot, rmdir() shall fail.
So calling `dir.rmdir(".")` will never work on Linux.
Instead, get the parent directory, and remove the child directory by name.
* Avoid lowercasing source asset paths when resolving dependencies
Source asset paths may be case sensitive, so their case must be preserved
when doing operations that hit the underlying filesystem. This method was
always lowercasing them, which would cause dependencies to not be found.
* Correct test to expect product filenames to be lowercase
The modtime tests were failing in Linux due to something unrelated to file
modtime checking. The Asset Processor Manager does this during AnalyzeJob:
```
if (foundInDatabase && jobs[0].m_fingerprint == jobDetails.m_jobEntry.m_computedFingerprint)
{
// If the fingerprint hasn't changed, we won't process it.. unless...is it missing a product.
```
In this case, the test was setting up a product whose file case was the
same as the source asset, and would write it to the cache dir using mixed
case, but use the normal asset processor API to write the product file path
to the database, which recorded the path in lowercase. When the manager
then went to check if the source asset's products all exist, it checked the
lowercase path, which didn't exist.
This fixes that test failure, by updating the test to write the product
file to the cache using the proper lowercased path.
* Update test to define a "not current platform" for Linux
This test was failing because it was setting some "not current platform"
variable to be set to "pc" on Linux, when
`AssetSystem::GetHostAssetPlatform()` is defined to:
```cpp
inline const char* GetHostAssetPlatform()
{
return "mac";
return "pc";
// set this to pc because that's what bootstrap.cfg currently defines the platform to "pc", even on Linux
return "pc";
#error Unimplemented Host Asset Platform
}
```
The test would go on to assert that "pc" was simultaneously in a list and
not in the same list.
This fixes the test by updating the code to set the "not the current
platform" variable appropriately on Linux.
The expectations were also updated to improve the output on test failure.
Instead of this:
```
Value of: recogs["rend"].m_platformSpecs.contains(platformWhichIsNotCurrentPlatform)
Actual: true
Expected: false
```
You now get this:
```
Value of: recogs["rend"].m_platformSpecs.keys()
Expected: (has 3 elements and there exists some permutation of elements such that:
- element #0 is equal to pc, and
- element #1 is equal to es3, and
- element #2 is equal to server) and (doesn't contain any element that is equal to pc)
Actual: { pc, server, es3 } (of type QList<QString>), whose element #0 matches
```
* Prevent windows supported path separators to be included in the test paths for UpdateToCorrectCase_ExistingFile_ReturnsTrue_CorrectsCase
* Fix failing linux unit test "PlatformConfigurationUnitTests.TestFailReadConfigFile_RegularScanfolder"
caused by static variable not being reset from a different test run when using AssetUtilities::ComputeProjectPath
* Fix AZ_RTTI declaration for RequestEscalateAsset Message
* Implement FileWatcher for Linux to fix AssetProcessorMessages.All test (RequestAssetStatus)
* Split AssetProcessorMessages into 2 tests, one with RequestAssetStatus/ResponseAssetStatus and one without
Add The RequestAssetStatus/ResponseAssetStatus as a sandbox test because it relies on FileWatcher thread and seems to be timing related
* Remove FileWatcher_win.cpp from the Linux specific folder for FileWatcher
* - Fix build error related to non-unity builds
- Fixed failed linux test 'Test/LegacyTestAdapter.AllTests/UtilitiesUnitTest' caused by misplaced windows only EXPECT
- Remove test trait AZ_TRAIT_DISABLE_FAILED_ASSET_PROCESSOR_TESTS for linux to expose remaining failed tests
* Fixed failed linux test 'Test/LegacyTestAdapter.AllTests/RCcontrollerUnitTests' caused by misplaced windows only EXPECT
* - Fix FileWatcher unit test, disable incompatible subtests for Linux
- Fix errors in FileWatcher_linux from results of the FileWatcher Unit Test
* Remove AZ::AssetProcessor.Tests.Sandbox tests from definition and restore the original AssetProcessorMessages.All tests now that Filewatcher_linux was fixed
* Fixes for failed unit tests: AssetProcessorManagerUnitTests and AssetProcessorManagerUnitTests_JobDependencies_Fingerprint
- Caused by differences between between case-sensitive files (Linux) and non-case-sensitive Filesystems (Windows)
* Update consts in FileWatcher_linux.cpp to constexpr
* Fixes related to PR comment suggestions
* - Removed std::bind and replaced with lambda in FileWatcher_linux
- Replaced String replace functions for path separators to use AZ::IO::Path::LexicallyNormal() instead
* Restoring string replace function in PathDependencyManager::ResolveDependencies due to unit test failure
Co-authored-by: Chris Burel <burelc@amazon.com>
* Updating the DefaultProject template to not insert the project-path parameter into the VS Debugger Arguments for any applications
Added project-path injection directly within the LauncherUnified and AssetBuilder cmake scripts where their targets are defined
* Removing the add_vs_debugger_arguments call from the AutomatedTesting CMakeLists.txt
* Fixing the enable_gem.py and disable_gem.py commands
The project path wasn't taking into account when querying for gems,
templates and restricted directories registered with the project
Fixing the cmake.py add_gem_dependency and remove_gem_dependency methods
to properly detect a gem within a `set(ENABLED_GEM ...)` cmake variable
Also updated the add_gem_dependency to add the gem right before the end
marker of ')'
Updated the remove_gem_dependency to remove each instance of a gem with
a content that is in between in the `set(ENABLED_GEM ...)` cmake
variable
* Correct Typo in manifest.get_registered doc string
* should pickup the external directories registered by the project
* Add support for AzTest and AzTestRunner in the SDK
* missing IMPORT_LIB
* Moved where .Assets targets get generated so they are visible in the SDK
* generate the Directory.Build.props in the right path
* excluding target on platforms that dont support it
* Added loading bar mode to project button
* Added ProjectBuilder files
* commmit current progress for project building
* Push current project building work
* Full build commands built out and message boxes for lots of situation
* Replaced defaultProjectImage placeholder
* Added installed cmake path to builder process env PATH
AMZN-nggieber
Terry Michaels
amzn-mike
lumberyard-employee-dm
Benjamin Jillich
AMZN-stankowi
Eric Phister
yuriy0
Mike Balfour
Alex Peterson
sharmajs-amzn
amzn-sj
Steve Pham
Scott Romero
Esteban Papp
amzn-mgwynn
mgwynn