* Fix code that deregisters the Atom Scene subsystem from the AzFramework Scene
The AzFramework Scene subsystem API is a generic container based on the
type of argument that is passed to it. It maintains a vector of typeids,
and only one object of any type is stored at a time. The Bootstrap system
component registers the Atom scene as a `ScenePtr` (aka
`AZStd::shared_ptr<RPI:Scene>`) with the AzFramework Scene's generic
subsystem. However, the component was previously deregistering the type by
value, `RPI::Scene`. Since no subsystem for the type `RPI::Scene` was set,
unsetting this type did nothing. The result was that the `RPI::Scene`
object would still be around by the time that all the Atom
`InstanceDatabse`s were being destroyed, resulting in a large number of
errors reported about leaked instances during global shutdown.
This fixes the above issue by passing the `m_defaultScene` as a parameter
to `AzFramework::Scene::UnsetSubsystem`, the same value that is passed to
`SetSubsystem`. This is better, because instead of providing explicit
template arguments (which were specifying the incorrect type), this now
allows the compiler to deduce the correct type, and the syntax is symmetric
with the call to `SetSubsystem`.
Signed-off-by: Chris Burel <burelc@amazon.com>
* Correctly release the AWS API from the `HttpRequestManager` module
This code was incorrectly assuming that
`AWSNativeSDKInit::InitializationManager::Shutdown()` would be called
automatically by the `InitializationManager` itself. However, all that
`InitAwsApi()` does is create an `AZ::EnvironmentVariable`, which is a
ref-counted type, and stores it in a global static. That global static is
defined in a static library (namely `AWSNativeSDKInit`), which is linked
in to the `HttpRequestManager` dynamic lib. Because it is a global static,
it has to be explicitly cleared with the call to `Shutdown()`. Otherwise
the destructor of the EnvironmentVariable doesn't happen until global
destruction, by which time the allocator that is supplied to the AWS SDK
has already been destroyed, and the shutdown of the AWS SDK attempts to use
the already-destroyed allocator.
Signed-off-by: Chris Burel <burelc@amazon.com>
* Avoid blocking the remote console server thread if there are no connections
The Remote console server runs in a separate thread. Previously, it would
directly call `AzSock::Accept()` and block the server thread until some
client connected to it. However, if no client connected, the thread would
continue to be blocked, even if the game launcher tried to exit.
This adds a check to see if there's a client on the socket before calling
`Accept()`, to avoid the deadlock on launcher exit.
Signed-off-by: Chris Burel <burelc@amazon.com>
* Fix a log message to print one message per line
Signed-off-by: Chris Burel <burelc@amazon.com>
* Allow pumping the event loop to close the launcher window
Events from the OS are handled in the game's main loop. The general loop
looks like this:
* Read events from the OS
* Tick the game application
One of the events that can come from the OS is that the window hosting the
game is closed. When this event happens, many resources provided by the
renderer are freed, and the game application's `shouldExit` bit is set.
However, when the game's `Tick()` is called, there is lots of code that
assumes the renderer is still there. To avoid crashing in the `Tick()`
call, check if the game should exit after pumping the system events.
Signed-off-by: Chris Burel <burelc@amazon.com>
* Unload the level when exiting the launcher
This ensures that any resources held onto by the level are freed before the
launcher exits.
Signed-off-by: Chris Burel <burelc@amazon.com>
* Add an explicit bus `Disconnect()` call to `AZCoreLogSink`
This is necessary because this bus has virtual functions and can be called
from multiple threads.
Signed-off-by: Chris Burel <burelc@amazon.com>
* Allow normal cleanup to take place when exiting the game launcher
Previously, global cleanup was side-stepped by calling `TerminateProcess`
or `exit`, when quitting the game launcher. This is in contrast to the call
to `_exit` on Linux and Mac when exiting the Editor. That leading `_` makes
a big difference: the former runs object destruction, the latter does not.
Instead of making the launcher exit with `_exit` on Linux, instead, remove
that call and actually run all the atexit code.
This does not modify the Editor's behavior however. It still uses `_exit`
and `TerminateProcess`.
Signed-off-by: Chris Burel <burelc@amazon.com>
* Remove the "TEST_SUPPORTED" traits.
Terrain unit tests should be usable on all platforms, so they shouldn't need a platform-specific trait to enable/disable.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix a few misc terrain bugs.
* Change Activate/Deactivate to happen immediately instead of deferring. There were too many order-of-operation bugs caused by trying to defer this.
* Added implementation for calculating normals.
* Fixed bug where GetHeightSynchronous wasn't stopping at the highest-priority layer.
* Added locks for SurfaceData bus to help ensure we lock our mutexes in the correct order and avoid deadlocks.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add trivial TerrainSystem tests.
Tests construction, Activate(), Deactivate(), and destruction.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Unified Terrain system calls on single bus.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added mock for TerrainDataNotificationBus listener.
Also added unit tests to verify the listener, and added in missing notification events.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Removed extra Sampler class.
Fixed up APIs to correctly pass Sampler and terrainExistsPtr around.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched MockTerrainSystem to be proper gmock.
This makes it for flexible to use and easier to reuse from other test environments.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix settings bug caused by bad order of operations that occurred when the methods moved to a different bus.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Eliminate extra EBus by simplifying area initialization.
Previously, there was a back-and-forth ebus signal used for the terrain system to find any terrain spawners that were created prior to the terrain system activation. Now it uses the more simple technique of just grabbing all the spawners that are currently hooked up to the spawner ebus.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switch to NiceMock so that "uninteresting" mock calls get ignored.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Addressed PR feedback.
Filled in terrainExistsPtr at the end, and added it to GetNormal as well.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed shader height calculation.
It was off by half a pixel, and it was interpolating, both of which were wrong.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed issue where two Paths could compare equal to each other, but hash
differently
This issue is caused by the Path comparison logic using the path
separator of the left path in a comparison of two paths(left and right)
to determine whether the PathComparison is case-sensitive or not.
The logic has been updated to only perform a non-case-sensitive path
comparison if both paths are using the WindowsPathSeperator of `\`
Also fixed issue with the Hashing algorihtm of the Path class to always
hash the root directory as if it is `/`.
This allows a path of "C:\foo" and "C:/foo" to hash to the equivalent
value.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* MS Build Tools 14.29 workaround around suppressing warnings using the external header feature
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added a max_size function to all AZStd container style allocator
functions
The max_size functions returns the maximum value that a single contiguous
allocation value returns
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the BestFitExternalMapSchema and MallocSchema
GetMaxContiguousAllocationSize function
Those functions now return a Max allocation size of
AZ_CORE_MAX_ALLOCATOR size to indicate the maximum size for a single
allocation
Changed the IAllocatorAllocator::GetMaxContiguousAllocationSize function
from a pure virtual function to regular virtual function
Removed the left over String.cpp test to validate that the issue with
the allocator::max_size() function was occuring
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Fixes to icon generation. Generating a pixmap out of a size won't take the screen scaling factor into account, resulting in blurry results.
Note that this is not a catchall solution, every case needs to be addressed manually.
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* HighDpi fixes for startup splashscreen and About dialog
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Add helper function to generate appropriate pixmaps for a screen based on its dpi settings.
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Implement sync interval and refresh rate API for RenderViewportWidget
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Measure actual frame timings in the viewport info overlay.
Takes the median of the sum of (frame end - frame begin) to provide more a more representative view of when frames begin and end.
Note: Until VSync is internally supported by the event loop, this will produce nearly identical frame timings as the frame will spend as much time as needed synchronously waiting on a vblank.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Make frame timing per-pipeline, wire up refresh rate info to ViewportContext
Signed-off-by: nvsickle <nvsickle@amazon.com>
* POC: Frame limit pipeline rendering
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Switch Editor tick to every 0ms to allow better tick accumulation behavior
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Move RPISystemComponent to the tick bus, remove tick accumulation logic
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Add `AddToRenderTickAtInterval` to RenderPipeline API
This allows a pipeline to update at a set cadence, instead of rendering every frame or being directly told when to tick.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Make ViewportContext enforce a target framerate
-Adds GetFpsLimit/SetFpsLimit for actively limiting FPS
-Calculates a render tick interval based on vsync and the vps limit and updates the current pipeline
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Add r_fps_limit and ed_inactive_viewport_fps_limit cvars
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Quick null check from a crash I bumped into
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Fix off-by-one on FPS calculation (shouldn't include the not-yet-rendered frame)
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Clarify frame time begin initialization
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Fix TrackView export.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Address some reviewer feedback, revert RPISystem API change, fix CPU profiler.
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Add g_simulation_tick_rate
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Address review feedback, make frame limit updates event driven
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Remove timestamp update from ComponentApplication::Tick
Signed-off-by: nvsickle <nvsickle@amazon.com>
* Fix window size when dropped on a screen with a different scale setting compared to the one it was dragged from.
Note that this fixes a bug that could only be reproduced with the PerScreenDpiAware setting activated - current editor uses SystemDpiAware.
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* Fix loss of precision warning.
Signed-off-by: Danilo Aimini <82231674+AMZN-daimini@users.noreply.github.com>
* remove redundant API calls from EditorViewportWidget and use new WorldToScreen call
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* remove additional pre/post widget render calls that are no longer required
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* Avoid redefining `PRI` macros on Linux
The fixed width 64-bit integer types are defined differently per platform.
Some platforms define it as "long", others define it as "long long". For
consistency, `AZ::u64` or `AZ::s64` is always defined to "long long".
However, this causes problems for formatting those types, because on
platforms where `uint64_t` is a `long`, `PRIu64` gives the wrong format
string for `AZ::u64`. Previously this was fixed by redefining the `PRI`
macros so that they work for `AZ::u64`, but that breaks the ability to
format `uint64_t`.
We could add an AZ-specific version of the `PRI` macros for 64-bit integer
types, but we don't really need to, since they are `long long` on every
platform we support.
* Use `%ll` for `AZ::u64`
* Use `PRIu64` for `uint64_t`
Signed-off-by: Chris Burel <burelc@amazon.com>
* Avoid redefining `PRI` macros in CryCommon
Signed-off-by: Chris Burel <burelc@amazon.com>
The terrain feature processor was crashing due to an invalid shader name. The shader name has been fixed, but the feature processor has also been hardened so that it no longer crashes if a shader fails to load.
Also, while testing, this inadvertently exposed a second crash in EntitySerializer that occurs when components don't serialize in correctly.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed PathView `MakeRelativeTo` and `Append` functions path segment
comparisons when using the Windows path separator of '\'
The PathSegment comparisons were case-sensitive in both those functions
and now use `Internal::ComparePathSegments` function to perform the
appropriate case comparison based on the path separator value of the
Path class
Reverted the LocalFileIO::CheckInvalidWrite function back to not
lowercasing the assets alias and input path before invoking
`PathView::IsRelativeTo`
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Simplified the LocalFileIO::ConvertToAliasBuffer logic
Fix for the ArchiveTest
`IResourceList_Add_AbsolutePath_RemovesAndReplacesWithAlias` and
`TestArchiveViaFileIO` test
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added a PathIterable structure stores a non-heap container of normalized path segments of an input path.
Moved the PathParser logic to a PathParser.inl file
Removed dependency of the PathView::IsRelativeTo logic on FixedMaxPath
There is no longer a 1024 character limit when determining if a path is relative to a base
Added a GetNormalPathParts and AppendNormalPathParts to function and removed LexicallyNormalInplace to share the logic for creating a normalized path between IsRelativeTo and LexicallyNormal
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Clang PathIterable.inl build fix
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Fixed Normalize and Relative Path functions initialize the result paths
With the correct path separator for the paths being transformed
Ported over the Custom Path Root Separator logic to the PathParser.inl
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated he Shader Preprocessor include path gather.
It now uses AZ::IO::Path for the path operations and checks if the path
exist before adding it to the list of include paths.
Finally the set logic has been removed for a simpler find_if check to
see if the include path already since in the project include paths
This fixes the Asset Processing issues with shader includes due to the
Path.inl changes
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Fixed tail recursion call to AppendNormalPathParts to supply a PathView with the same path separator as the parent call
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding reference qualifier overloads to the Path class Native function
Removed the conversion operators from the Path class for converting to a
string_type&/const string_type&
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
Many of these are just extra noise in the profile, but the one in Archive.cpp could also cause PIX to crash.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Move a few specializations from AzStdOnDemandReflection.inl to cpp file
This reduces compilation time and produced profile/debug file sizes.
The specializations for string and string_view are only implemented for 'char' type, since
others are not used anywhere.
Extracted `Reflect` method from `ClientAuthAWSCredentials` to a cpp file.
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Windows build fixes.
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Added missing license.
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Fix missing spaces in template argument lists
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Clang format on ClientAuthAWSCredentials.cpp
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Merge upstream development and fix linux build.
Signed-off-by: nemerle <96597+nemerle@users.noreply.github.com>
* Miscellaneous fixes and PAL changes required for restricted platforms.
Signed-off-by: bosnichd <bosnichd@amazon.com>
* Rename O3DE::ProjectManager::ProjectUtils::ReplaceFile -> ReplaceProjectFile to prevent conflict with Windows ReplaceFile #define
Signed-off-by: bosnichd <bosnichd@amazon.com>
* WIP changes for viewport single select and better integration tests
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* update test to verify single click selection in the viewport
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* temporarily remove changes for single select
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* temporarily remove ChangeSelectedEntity call
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* initial tests to validate current viewport selection model
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* some tidy-up before publishing PR
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* add reference to const type in loop
Signed-off-by: hultonha <hultonha@amazon.co.uk>
* temporarily disable box select test
Signed-off-by: hultonha <hultonha@amazon.co.uk>
Esteban Papp
Chris Burel
Mike Balfour
hultonha
lumberyard-employee-dm
Steve Pham
Danilo Aimini
Nicholas Van Sickle
AMZN-AlexOteiza
bosnichd
AMZN-AlexOteiza
Artur K
carlitosan
AMZN-koppersr
srikappa-amzn