The CriticalAssetsCompiled event can be handled to detect when the
AssetProcessor has finished processing Critical Assets
Also with the new event, an audit has been performed over all the
locations where the AssetCatalogEventBus OnCatalogLoaded event was being
handle to make sure it was the proper event to use.
If the handler was actually examing the enumerating over the full
catalog or querying all assets within the catalog, then it was a proper
use.
For handlers that were interested in a particular asset it was not
Moreover added implementations of `OnCatalogAssetChanged` and
`OnCatalogAssetAdded` to the FileTagComponent and the MaterialViewportComponent.
Any applications which uses the AtomToolsApplication
class(MaterialEditor, AtomSampleViewerStandalone,
ShaderMangementConsole) now signals a "CriticalAssetsCompiled" lifecycle
event as well as loads the "assetcatalog.xml" if it exists.
The Launcher application signals the "CrticalAssetsCompiled" event and
reloads the "assetcatalog.xml" for the ${project}.GameLauncher and
${project}.ServerLauncher in Launcher.cpp
Finally the Editor signals the "CriticalAssetsCompiled" and reloads the
"assetcatalog.xml" in CryEdit.cpp
resolves#6093
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Some fixes for paths with spaces
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* PR comments
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Adds mac test job
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Points to sysctl properly to handle zsh
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Fixes some macos differences with Linux when reading the CTEST_RUN_FLAGS parameters
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* adding the test job to the profile pipe
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Disables some tests in Mac that are not passing
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* passes config to cli_test_driver and sets the right trait for the test (pytest instead of lytesttools)
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Set proper traits for AtomRHI
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Corrected AZ_TRAIT_UNIT_TEST_PERLINE_GRADIANT_GOLDEN_VALUES_7878 values for Mac
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Disables EMotionFX tests in Mac
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Removes debugging prints
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Removes filters that were meant just for Linux
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* quotes are re-quoted in the test_mac.sh script
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* {lyn8865} Adding DataTypes::ScriptProcessorFallbackLogic
- Give the user an option how to handle fallback logic for script rules
Signed-off-by: Allen Jackson <23512001+jackalbe@users.noreply.github.com>
* the new code found an error in a Python script... it seems to work!
Signed-off-by: Allen Jackson <23512001+jackalbe@users.noreply.github.com>
* fixing up the regression test
Signed-off-by: Jackson <23512001+jackalbe@users.noreply.github.com>
* dump version number
Signed-off-by: Allen Jackson <23512001+jackalbe@users.noreply.github.com>
This change reworks the AssetProcessor's FileWatcher so that it only uses
one thread. This is motivated by getting better support for inotify on
Linux. The previous architecture required calling `inotify_init` once for
each directory that was being watched, and using separate inotify instances
for each watched tree. In addition, having separate threads per watched
tree is not necessary, and just consumes system resources. Each platform
supports watching multiple directories with the same platform-specific
watcher API, so each platform has been updated accordingly.
The interface to the FileWatcher class is greatly simplified. Previously,
it supported client-supplied filtering of the paths that would generate
notifications. This was done by subclassing `FolderWatchBase` and
implementing `OnFileChange`. However, only one filter was ever used, so
that filter is now hard-coded in the FileWatcher class, and the classes
driving the old filtering mechanism are removed. Users of the interface
now have a much easier time, they just call `AddFolderWatch` with the path
to watch, and only have to connect to one set of signals, instead of
separate signals per watched directory.
Signed-off-by: Chris Burel <burelc@amazon.com>
* AssetBuilder sends builder registration network message to AP
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Add AP activating status message
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* First builder handles registration.
Fixed deadlock caused by AP and AssetBuilder waiting on each other when registering by moving AP builder start code to a thread
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Clean up external builder registration
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Add thread description for builder manager idle thread
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Remove gem loading
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Clean up builder registration and remove unused functions
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Remove PostActivate call from batch application since it will be called after builders are registered
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Removal external builder dependency scanning since we no longer support builder dlls
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Fix missing bus disconnect
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Remove unused variable
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Moved AP-AssetBuilder specific types into AssetBuilder.Static library. Also removed some unused/old code
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Fix: Lua directory empty and always loading in editor
Signed-off-by: T.J. McGrath-Daly <tj.mcgrath.daly@huawei.com>
* fixed naming convention errors
Signed-off-by: T.J. McGrath-Daly <tj.mcgrath.daly@huawei.com>
* Tidy up
Signed-off-by: T.J. McGrath-Daly <tj.mcgrath.daly@huawei.com>
Co-authored-by: Tobias Alexander Franke <tobias.alexander.franke@huawei.com>
* bugfix: resolve Lua script file not found
REF: https://github.com/o3de/o3de/issues/5899
Signed-off-by: Michael Pollind <mpollind@gmail.com>
* chore: user lowcase version of assetIdLower
Signed-off-by: Michael Pollind <mpollind@gmail.com>
* Average incoming skin influences when multiple vertices have been welded. This is one option which will average out the weights even if two welded vertices have differing boneIds, but we probably also need to add the influences earlier in the process and enforce a process where the vertices do not get welded if they have influences with differing boneIds
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Move skin influences from MeshBuilderSkinningInfo to the vertex attribute layers so they are considered when choosing which vertices can be welded and so they are not duplicated when compatible vertices have been welded
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Updating unit tests
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Remove unused functions
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Update based on feedback from burelc
Signed-off-by: Tommy Walton <waltont@amazon.com>
* Enable process and ap connection tests on linux
* Updated 'OpenProjectManager' to use new the ProcessLauncher argument type
* Add logic to double-escape escaped double quotes in arguments on windows platforms
* Updated argument for LaunchProjectManager to reflect new ProcessLauncher argument type
* Fixed unit test arguments for 'arg=value' condition
* Fix compile errors for BuilderManager and RHI.Edit\Utils.cpp
* PAL'ify the GetCommandLineParametersAsString() to handle windows specific behavior
Signed-off-by: Steve Pham <82231385+spham-amzn@users.noreply.github.com>
Co-authored-by: byrcolin <byrcolin@amazon.com>
* Pass relative path IsFileExcluded so that only paths relative to the root scan folder are matched against the exclude filters.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Revert previous change. Remove the exclude filter for the Install directory.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Pass in relative path to the exclude filter as before. Fix the AssetScanner tests.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Prepend a ./ to the relative path in order to match the exclude patterns
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Remove hack to prepend ./. Update the exclude patterns so that the hack is no longer required.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Add missing ? and remove whitespace
Signed-off-by: amzn-sj <srikkant@amazon.com>
* 1. IsFileExcluded() now converts the input path to a path that's relative to its corresponding scan folder.
2. Update regex patterns in gems and AutomatedTesting as well.
3. Remove unnecessary escaping for '/'.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Use ConvertToRelativePath() function to compute path relative to a scan folder.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* More fixes to regex patterns
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Remove test case which tests a hypothetical scenario that cannot occur. Fix another test case by adding scan folder.
Signed-off-by: amzn-sj <srikkant@amazon.com>
* Remove assert that's not needed since it's a valid scenario
Signed-off-by: amzn-sj <srikkant@amazon.com>
Co-authored-by: amzn-sj <srikkant@amazon.com>
lumberyard-employee-dm
Esteban Papp
Benjamin Jillich
Allen Jackson
Chris Burel
Vincent Liu
amzn-mike
AMZN-Phil
nggieber
tjmgd
Michael Pollind
Jeremy Ong
Mike Balfour
AMZN-Phil
Tommy Walton
Alex Peterson
Steve Pham