What happened to cause this:
The test_WindowsAndMac_BundlesAndBundleSettings_EquivalentOutput test bundles the same content in two different ways, with the final intention to compare and verify the results are the same.
It's bundling up the level levels\testdependencieslevel\testdependencieslevel.spawnable
Along the way, it verifies the bundles it gets are what it expects. One of the bundle settings it uses is a relatively small maximum bundle size of 5 mib.
Note that when we use a maximum bundle size, it's not a hard limit, it's just when we go to create a new bundle, if the current bundle size + next file would make the bundle too big, it starts a new bundle. This means you can have bundles go over the bundle size in the case where one file is larger than the bundle size limit.
Somehow, one of the files referenced from this bundle ( goegap_4k_skyboxcm.exr.streamingimage ) is now 24 MB, which is larger than the default bundle size originally used, which is why the test fails, it goes to examine the contents of the second pak file of the first bundle, and it's larger than the maximum bundle size. That's why the test is failing.
Changing this to 30 mib causes this test to continue to pass.
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated UV channel name retrieval to match changes to the assimp sdk
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated FBX automated tests to work with latest changes
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updating to the latest build of assimp: 5.1.6 with our two fixes applied on top
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Adding updated linux package info
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Added mac package info for 5.1.6 assimp
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updating Linux assimp package hash with latest changes
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated mac hash to match latest assimp mac package
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated windows to the latest assimp 5.1.6 package
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Replaced TestDependenciesLevel's level.pak for TestDependenciesLevel.prefab to fix asset_bundler_batch_tests failure
Updated asset_bundler_batch_tests to reflect the update.
Signed-off-by: Rosario Cox <lesaelr@amazon.com>
* Missed one of the .spawnables changes
Signed-off-by: Rosario Cox <lesaelr@amazon.com>
* {lyn8865} Adding DataTypes::ScriptProcessorFallbackLogic
- Give the user an option how to handle fallback logic for script rules
Signed-off-by: Allen Jackson <23512001+jackalbe@users.noreply.github.com>
* the new code found an error in a Python script... it seems to work!
Signed-off-by: Allen Jackson <23512001+jackalbe@users.noreply.github.com>
* fixing up the regression test
Signed-off-by: Jackson <23512001+jackalbe@users.noreply.github.com>
* dump version number
Signed-off-by: Allen Jackson <23512001+jackalbe@users.noreply.github.com>
* Added an assert to verify AP and AP Batch close on teardown.
Signed-off-by: Rosario Cox <lesaelr@amazon.com>
* Removed ".exe" from assert to ensure it works on any platform
Fixed missing set of parenthesis in the assert
Added "AssetBuilder" to the assert to ensure assetbuilders have closed correctly
Signed-off-by: Rosario Cox <lesaelr@amazon.com>
* Moving the helper function from asset_processor_fixture to asset_processor_utils.
Changed individual process_utils calls into a single call with a list.
Signed-off-by: Rosario Cox <lesaelr@amazon.com>
* Added the missing references.
Signed-off-by: Rosario Cox <lesaelr@amazon.com>
This is a regression test for bundle mode causing the editor to crash if you mount a bundle containing a level.pak file.
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated missing dependency test to use assets that will have their builders change less often: other missing dependency test assets.
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated missing dependency tests to use assets that aren't deprecated or removed.
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Cleaning up errors with default assets, used in bundled release builds
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated simple asset references to be to the product, not source assets
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Fixed test_WindowsAndMac_FilesMarkedSkip_FilesAreSkipped to pass again.
Updated the test to verify the assets are actually skipped and not just missing, by having it first run without the skip command and verify they are in the first run. Also updated logging to print out sorted lists, to make it easier to debug failures on Jenkins in the future.
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Removed a test marked skip for legacy levels that featured a lot of assets that are no longer valid.
I don't think we need this specific test anymore in the future because prefabs replace the level system, and prefabs should have their own tests for product dependencies.
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated project path to use absolute path (#5459)
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Updated project path to work with latest project path changes
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Changed to workspace.paths.project() for getting full path to projects
Signed-off-by: AMZN-stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
Co-authored-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Fixed some files missed when groundplane_521 was renamed to 512 (#4958)
* Fixed references to 521x521 to reference the correct 512x512 FBX file
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Fixed asset hints
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Moved the Asset Catalog loading from LmbrCentral to the AzFramework::Application (#4568)
* Moved the loading of the AssetCatalog from LmbrCentralSystemComponent to AzFramework Application
Modified the AssetCatalog::InitializeCatalog function to no longer rely on the TickBus to send out the `AssetCatalogEventBus::OnCatalogLoaded` event.
It now queues a function on the AssetCatalogRequestBus to send the OnCatalogLoaded event as soon as the dispatching for the AssetCatalogRequestBus has completed on the current thread.
This is done by updating the AssetCatalogRequestBus to use EBus ThreadDispatchPolicy to add a callback to invoke any queued function has soon a thread has finished dispatching and has released its DispatchMutex
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the AssetCatalogRequestBus to add a custom DispatchLockGuard
The AssetCatalogRequestBus uses the custom lock guard to dispatch queued
events after it has unlocked it's context mutex for the current thread.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removed GetContext call from the
AssetCatalogRequests::PostThreadDispatchInvoker
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the definition of FileTagQueryManager::GetDefaultFileTagFilePath
function to return a path
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the AZ_CONSOLEFREEFUNC macro to actually use the _NAME
The _NAME parameter was not being used before, resulting in the Console
stringified name of the function being used.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removed CrySystem dependencies from the BundlingSystemComponent
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Moved the loading of the AssetCatalog from LmbrCentralSystemComponent to AzFramework Application
Modified the AssetCatalog::InitializeCatalog function to no longer rely on the TickBus to send out the `AssetCatalogEventBus::OnCatalogLoaded` event.
It now queues a function on the AssetCatalogRequestBus to send the OnCatalogLoaded event as soon as the dispatching for the AssetCatalogRequestBus has completed on the current thread.
This is done by updating the AssetCatalogRequestBus to use EBus ThreadDispatchPolicy to add a callback to invoke any queued function has soon a thread has finished dispatching and has released its DispatchMutex
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the AssetCatalogRequestBus to add a custom DispatchLockGuard
The AssetCatalogRequestBus uses the custom lock guard to dispatch queued
events after it has unlocked it's context mutex for the current thread.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removed GetContext call from the
AssetCatalogRequests::PostThreadDispatchInvoker
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the definition of FileTagQueryManager::GetDefaultFileTagFilePath
function to return a path
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the AZ_CONSOLEFREEFUNC macro to actually use the _NAME
The _NAME parameter was not being used before, resulting in the Console
stringified name of the function being used.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removed CrySystem dependencies from the BundlingSystemComponent
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Addded missing template parameter to AssetCatalogRequests
The fixes the compile error.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding AssetBus::MultiHandler::BusDisconnect call
The BlastSystemComponent was connecting to the Bus, but not
disconnecting from it, causing an assert to fire to it being a
multi-thread bus
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added support for DataDrive lifecycle events to the ComponentApplication
The events are using the SettingsRegistry NotifyEvent to track when
certain keys are modified to signal handlers.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Corrected invalid JSON creation in ModuleManager::DeactivateEntities
Resolved clang warning about used type alias
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Fix for dangling reference in lambda registered to the SettingsRegistry
Notifier event
This was causing the EditorPythonBinding tests to crash due to the
following circumstances.
First Python has created an instance of a SettingsRegistryProxy
Second the SettingsRegistry sends an event during the time when the
SettingsRegistryProxy exists.
This issue was exposed due to the ComponentApplication Lifecycle events
using the SettingsRegistry to dispatch during various times of the
application workflow.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added the generated cmake_dependencies.*.setreg files to engine.pak (#5073)
* Copied the generated cmake_dependencies.*.setreg file to the Cache
directory
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removed the platform name from the bootstrap.game.*.setreg
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Fixes for release builds with DCO fix (#5164)
* This set of changes is work toward allowing release builds to work with asset bundler generated bundles and legacy, non-prefab levels. This requires some other in-flight changes before this work is complete.
Updated engine seed list + fixed automated test
ComponentApplicationLifecycle has the ability to automatically register events if asked to register a handler and the event doesn't exist. This is only intended for cases where you need to register a handler early in startup before the settings registry file is loaded.
Added two new lifecycle events: One after the system entity has been activated, and one after the system interface has been created.
If you load an archive before the system entity has been activated, archive.cpp caches information about those archives until that time, so it can finish registration. This is because the serialization system and BundlingSystemComponent both need to be available to do this registration, but the bundles have to be loaded before those are initialized so that the settings registry file can be loaded.
Fixed an error were mounted pak files were searching for levels.pak and not level.pak, and not finding them. I'm pretty sure this logic doesn't do anything functional either way, but I've been testing legacy levels with this change and they work now.
Moved wildcard pak loading to where engine.pak is loaded. This is because the settings registry file that defines the IO stack to spin up must be available early in application startup, and this file must be within a mounted pak file. If you're using asset bundler generated bundles, they need to be loaded at this time so that file can be loaded.
Atom's BootstrapSystemComponent.cpp no longer initializes on AssetCatalogLoaded, and instead initializes on the ApplicationLifecycle event SystemInterfaceCreated. This is because the base assetcatalog.xml file is really just a development time concept, this file should not be used in packaged release builds, because those builds will make use of delta catalogs in each bundle loaded. The asset catalog contains the list of all assets that were in the cache at development time, and this contains content that developers don't want to ship, and they may want to specifically hide from their customers, so data miners don't find secrets about upcoming game content.
Recovering from a branch that had incorrect DCO
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Fixed an incorrect ebus disconnect and removed an include that's no longer needed
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Fixed a copy and paste typo from trying to recover the previous pull request
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated product IDs for the settings registry builder to no longer collide with the JSON builder. Now they are based on a hash of the configuration.
Updated the engine default seed list to include the new asset ID info for the renamed bootstrap file
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated the path to the application lifecycle events, because runtime settings aren't included in the merged bootstrap file.
Addressed some feedback on printing out a string view on an error
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Removed a test that uses old assets that aren't relevant. We may not need this test anymore, but if we do we've backlogged a task to create a new test to cover this behavior without using old assets.
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Renamed SystemInterfaceCreated event to LegacySystemInterfaceCreated
Removed SystemEntityActivated event. Now that I have the rest of the fixes in this pull request, this new event wasn't needed, the already existing SystemComponentsActivated event does what I need.
Changed list to vector
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
Co-authored-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* This set of changes is work toward allowing release builds to work with asset bundler generated bundles and legacy, non-prefab levels. This requires some other in-flight changes before this work is complete.
Updated engine seed list + fixed automated test
ComponentApplicationLifecycle has the ability to automatically register events if asked to register a handler and the event doesn't exist. This is only intended for cases where you need to register a handler early in startup before the settings registry file is loaded.
Added two new lifecycle events: One after the system entity has been activated, and one after the system interface has been created.
If you load an archive before the system entity has been activated, archive.cpp caches information about those archives until that time, so it can finish registration. This is because the serialization system and BundlingSystemComponent both need to be available to do this registration, but the bundles have to be loaded before those are initialized so that the settings registry file can be loaded.
Fixed an error were mounted pak files were searching for levels.pak and not level.pak, and not finding them. I'm pretty sure this logic doesn't do anything functional either way, but I've been testing legacy levels with this change and they work now.
Moved wildcard pak loading to where engine.pak is loaded. This is because the settings registry file that defines the IO stack to spin up must be available early in application startup, and this file must be within a mounted pak file. If you're using asset bundler generated bundles, they need to be loaded at this time so that file can be loaded.
Atom's BootstrapSystemComponent.cpp no longer initializes on AssetCatalogLoaded, and instead initializes on the ApplicationLifecycle event SystemInterfaceCreated. This is because the base assetcatalog.xml file is really just a development time concept, this file should not be used in packaged release builds, because those builds will make use of delta catalogs in each bundle loaded. The asset catalog contains the list of all assets that were in the cache at development time, and this contains content that developers don't want to ship, and they may want to specifically hide from their customers, so data miners don't find secrets about upcoming game content.
Recovering from a branch that had incorrect DCO
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Fixed an incorrect ebus disconnect and removed an include that's no longer needed
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Fixed a copy and paste typo from trying to recover the previous pull request
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated product IDs for the settings registry builder to no longer collide with the JSON builder. Now they are based on a hash of the configuration.
Updated the engine default seed list to include the new asset ID info for the renamed bootstrap file
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Updated the path to the application lifecycle events, because runtime settings aren't included in the merged bootstrap file.
Addressed some feedback on printing out a string view on an error
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Removed a test that uses old assets that aren't relevant. We may not need this test anymore, but if we do we've backlogged a task to create a new test to cover this behavior without using old assets.
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Renamed SystemInterfaceCreated event to LegacySystemInterfaceCreated
Removed SystemEntityActivated event. Now that I have the rest of the fixes in this pull request, this new event wasn't needed, the already existing SystemComponentsActivated event does what I need.
Changed list to vector
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* {lyn7677} updated test modules to pass AssetPipelineTests on Linux
Fixes for Python AssetPipelineTests modules fail on Linux
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
* Separating the Linux and Mac concerns
Signed-off-by: jackalbe <23512001+jackalbe@users.noreply.github.com>
ATOM-16575 clean up image builder presets files
Removed unused image builder presets
Deprecating preset UUID and use preset name as unique id
Delete all .exportsettings file which were only used for legacy imageProcessing gem.
Signed-off-by: Qing Tao <qingtao@amazon.com>
* Addressing CMake warning and removing timeouts that are the same as the default
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* missed this one
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Making it an error so developers stops putting timeouts longer than the allowed one since it causes AR issues
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* fixing warning from the nightly build
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* disabling test that is triggering a timeout
Signed-off-by: Esteban Papp <81431996+amznestebanpapp@users.noreply.github.com>
* Cleared m_scriptFilename between scene files.
This fixes a bug where a Python script file would be run on a scene file
that didn't have a script file set.
Added a general case version to SceneBuilderWorker.cpp, to make it easy
to mark all scene files as dirty.
Automated tests for this will come in a separate pull request.
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Work in progress automated tests
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Python test done
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Sorted jobs work now. This may sort too aggressively, I'll remove the additional sorting after some testing.
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Cleaned up test
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Fixed stray '
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Removed temp code from test
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Command line help options for AP
Removed job sorting that wasn't actually sorting jobs
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Changed constant variable names to match coding standards
Signed-off-by: stankowi <4838196+AMZN-stankowi@users.noreply.github.com>
* Update fbx test dbgsg files
Remove rc products from fbx test expected output
Update warning counts for 2 of the tests - these are due to missing material properties
Add SkipAtomOutput setting to disable atom material and mesh processing in scene as these pull in a lot of external dependencies to Process
Removed BlendShapeData and MeshData debug output of positions/normals/faces
Updated ManifestImportRequestHandler to remove warning about Joining 2 absolute paths
Updated AssImpMaterialImporter to use new GenerateRelativeSourcePath API to fix issue where relative path generation failed with tmp project directories
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Add comment for setting
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Add override dbgsg file to python test
The mesh optimizer specifically avoids creating optimized nodes for nodes that are not selected, resulting in a different scene graph that requires a different dbgsg file to compare with
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Replace hardcoded passing of specific registry setting to instead pass all registry settings to AssetBuilder
Signed-off-by: amzn-mike <80125227+amzn-mike@users.noreply.github.com>
* Final update copyright headers to reference license files at the repo root
Signed-off-by: spham <spham@amazon.com>
* Fix copyright validator unit tests to support the stale O3DE header scenario
Signed-off-by: spham <spham@amazon.com>
* Fix for DeleteCachedAssets_AssetsReprocessed fails on Debug Nightly Builds
* added -ap_disableAssetTreeView=true to disable the Qt tree view for the asset tab to get the parts that want to be tested finish
* only shows up on Debug
Tests:
=== test session starts ===
AutomatedTesting/Gem/PythonTests/assetpipeline/asset_processor_tests/asset_processor_batch_tests_2.py::TestsAssetProcessorBatch_AllPlatforms::test_AllSupportedPlatforms_FastScanWorks_FasterThanFullScan[windows-AutomatedTesting] PASSED [ 50%]
AutomatedTesting/Gem/PythonTests/assetpipeline/asset_processor_tests/asset_processor_batch_tests_2.py::TestsAssetProcessorBatch_Windows::test_WindowsPlatforms_RunAPBatchAndConnectGui_RunsWithoutEditor[windows-AutomatedTesting] PASSED [100%]
--- generated xml file: F:\amazon\o3de\build\vs2019\Testing\Pytest\AssetPipelineTests.Batch_2_Sandbox.xml ---
=== 2 passed, 4 deselected in 18.32s ===
* using O3DE engine assets instead of level.pak
* updated the binary find() logic for DeltaCatalog.xml
Tests: AutomatedTesting/Gem/PythonTests/assetpipeline/asset_processor_tests/asset_bundler_batch_tests.py
* * Remove test repository references
* * Update asset_builder_tests.py docstring to include test steps
* * Update test docstrings in asset_bundler_batch_tests.py to include test
steps
* * Update asset_processor_batch_dependency_tests.py docstrings to contain
test steps
* * Update asset_processor_batch_dependency_tests2.py docstrings to have
test steps
* * Update asset_processor_batch_tests.py docstring to include test steps
* * Update asset_processor_batch_tests_2.py docstrings to include test
steps
* Removed a references to a JIRA ticket ID
* * Update asset_processor_guit_tests.py docstrings to include test steps
* * Update asset_processor_gui_tests_2.py docstrings to have Test Steps
* * Update asset_relocator_tests.py docstrings to include test steps
* * update missing_dependency_tests.py docstrings to have test steps
* * Update auxiliary_content_tests.py docstrings to have test steps
* * Update fbx_tests.py docstrings to have test steps.
* * Update bank_info_parser_tests.py docstrings to have test steps
* * Removed Jira issue ids from Asset Pipline owned code
* * Undid two errornous code changes.
* * Addressed dbbronso PR-978 feedback.
* Steps declared and not populated. 1 - Removed errornous. 2 - Added missing step
* Fixed line formatting by removing bad blank line in Docstring
* Addressed PR-978 feedback from AMZN-stankowi
* Removed commented out entry from cmakefile
* Fixed several casing and spelling/typo issues caught in review
* Added a missing test step in asset_bundler_batch_tests.py
* Removed a test dealing with external projects, cut LYN-4116 to replace
* Calarfied test steps in asset_processor_gui_tests.py
* Noted test in asset_processor_gui_tests that cannot be ran manually
* Clarified test steps for fbx_tests
* Added in a comment and whitespace to a disguised operation.
Co-authored-by: stankowi <stankowi@amazon.com>
* LYN-2537 Moved the Engine and Editor folder to be within the EngineAssets folder
* Fixed Documentation in bootstrap.cfg to correct the path to the user project specific registry file
* Adding a newline to the output of AssetCatalog 'Registering asset..., but type is not set' message
* Updating the AssetProcessorPlatformConfig.setreg Scan Folder to detect
the @ENGINEROOT@/EngineAssets/Engine path for engine runtime assets and
@ENGINEROOT@/EngineAssets/Editor path for engine tool assets
* Updating references to Icons and other assets to account for moving the
Engine and Editor folder under a single EngineAssets folder
* Moving the Engine Settings Registry folder from Engine/Registry -> Registry
* Removed the LY_PROJECT_CMAKE_PATH define as it is not portable to other locations. It is hard coded to the project location that was used for the CMake configuration. Furthermore it paths with backslashes within it are treated as escape characters and not a path separator
* Updated the LyTestTools asset_processor.py script to copy the exclude.filetag from the EngineAssets/Engine directory now
* Fixed Atom Shader Preprocessing when running using an External Project
* Updated the TSGenerateAction.cpp to fix the build error with using a renamed variable
* Updated the Install_Common.cmake ly_setup_others function to install the
EngineAssets directory and the each of the Gem's Assets directory while
maintaining the relative directory structure to the Engine Root
Also updated the install step to install the Registry folder at the
engine root
* Fixed the copying of the Registry folder to be in the install root, instead of under a second 'Registry' folder
* Moving the AssetProcessorPlatformConfig.setreg file over to the Registry folder
* Updated the LyTestTools and C++ code to point that the new location of
the AssetProcessorPlatformConfig.setreg file inside of the Registry
folder
* Renamed Test AssetProcessor*Config.ini files to have the .setreg extension
* Converted the AssetProcessor test setreg files from ini format to json
format using the SerializeContextTools convert-ini command
* Updated the AssetProcessor CMakeLists.txt to copy over the test setreg files to the build folder
* Updated the assetprocessor test file list to point at the renamed AsssetProcessor*Config setreg filenames
* Removed the Output Prefix code from the AssetProcessor. The complexity that it brought to the AP code is not needed, as users can replicate the behavior by just moving there assets underneath a another folder, underneath the scan folder
* Adding back support to read the AssetProcessorPlatformConfig.setreg file from the asset root. This is only needed for C++ UnitTests as they run in an environment where the accessing the Engine Settings Registry is not available
* Updating the Install_common.cmake logic to copy any "Assets" folder to
the install layout.
The Script has also been updated to copy over the "Assets" folder in the
Engine Root to the install layout instead of an "EngineAssets" folder
* Updating References to EngineAssets source asset folder in code to be the Assets source folder
* Moved the Engine Source Asset folder of 'EngineAssets' to a new folder name of 'Assets'. This is inline with the naming scheme we use for Gem asset folders
* Adding the EngineFinder.cmake to the AutomatedTesting project to allow it to work in a project centric manner
* Updating the LyTestTools copy_assets_to_project function to be able to copy assets with folders to the temporary project root
Fixed an issue in LyTestTools where the temporary log directory could have shutil.rmtree being called twice on it leading to an exception which fails an automated test
Updated the asset_procesor_gui_tests_2 AddScanFolder test to not use the
output prefix, but instead place the source asset root into a
subdirectory
* Correct the AssetProcessorPlatformConfig Scan Folders for the EngineAssets directory to point at the Assets directory
* Updated the asset procesor batch dependency test scan folder to point at the 'Assets' folder instead of 'EngineAssets'
AMZN-stankowi
LesaelR
Allen Jackson
chiyenteng
Esteban Papp
Tommy Walton
amzn-mike
Qing Tao
sharmajs-amzn
Steve Pham
FuzzyCarterAWS
Fuzzy Carter
Terry Michaels
AMZN-AlexOteiza
Sean Sweeney
lumberyard-employee-dm
alexpete
oyongzhi