The problem is that SurfacePoint doesn't have default values when constructed, and a few of the unit tests weren't setting m_position because the values weren't strictly needed for the test. However, the SurfacePointList checks them for validity and asserted when they couldn't be found, which was hit-and-miss due to it being uninitialized memory that was usually but not always 0xCCCCCCCC.
Improved the assert message and set the position values everywhere.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add comparison operators to SurfaceTagWeight.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed AddSurfaceTagWeight to always combine weights.
This simplifies the API a bit and defines the behavior if someone ever tries to add a duplicate tag.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added benchmarks for measuring the performance-critical APIs.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed SurfaceTagWeights to a fixed_vector.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add inPosition to AddSurfacePoint.
This will be used to detect which input the surface point is associated with.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add inPositionIndex to the appropriate APIs.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched Gradient Surface benchmarks to use actual surface components.
The gradient unit tests and benchmarks were previously using a mock surface data system, which led to misleading benchmark results. Now, the actual SurfaceData system gets constructed, and the tests use a mock provider, but the benchmarks use actual shape providers for more realistic benchmarking.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed unit tests to have better query ranges.
Half of each previous range was querying outside the surface provider's data.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* First attempt at removing SurfacePointLists.
This currently runs significantly slower than the previous code but passes the unit tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Another attempt at optimization.
This one runs faster than the previous, but still slow.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix the cmake dependency so that the gradient tests rebuild SurfaceData.dll when run.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switch SurfaceAltitudeGradient over to the new bulk API.
Also, optimized the non-bulk API by having it reuse the SurfacePointList to avoid the repeated allocation / deallocation cost.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched to using an indirect index so that all allocations are consecutive in our reserved buffer.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched back to SurfaceTagWeight again.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added runtime dependency to LmbrCentral for unit tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched code over to use the full EnumeratePoints in most cases.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added knowledge of max surface point creation into the system.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add generic GetSurfacePointsFromList API implementation for surface providers.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed implementation to use the correct maximum number of input points based on the surface providers being queried.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix out-of-bounds references on empty lists.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix memory allocation that caused benchmark runs to crash.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Starting to clean up the API.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Move SurfacePointList into separate files for easier maintainability.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed bug where too many points were filtered out due to using the position Z as a part of the AABB check.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Made FilterPoints an internal part of SurfacePointList so we can choose when and how to perform the filtering.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Final cleanup / comments.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added includes for non-unity builds.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed how unit tests initialize the mock lists to try and fix the linux errors.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed compile error.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched Gradient Surface benchmarks to use actual surface components.
The gradient unit tests and benchmarks were previously using a mock surface data system, which led to misleading benchmark results. Now, the actual SurfaceData system gets constructed, and the tests use a mock provider, but the benchmarks use actual shape providers for more realistic benchmarking.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed unit tests to have better query ranges.
Half of each previous range was querying outside the surface provider's data.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* First pass at encapsulating SurfacePointList.
The biggest challenge in optimizing SurfacePointList(s) usage is the overall memory management associated with it. There are M surface points with N surface mask entries created for every input point, which leads to a lot of container reallocation and memory shuffling when processing multiple input points. By encapsulating the list, it should become easier to preallocate the entries, as well as keep "helper data" around for managing the bookkeeping to associate the input points with the output points.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Small fixes and TODO reminders.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Encapsulate surface point creation and separate EnumeratePoints out from modifications.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Start removing SurfacePoint from the exposed API.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed SurfacePointList to split out the surface point storage to allow for span<> usage over time.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Removed entity id
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Removed SurfacePoint from SurfaceData, changed all remaining uses to AzFramework::SurfaceData::SurfacePoint.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Encapsulated SurfaceTagWeightMap and renamed to SurfaceTagWeights.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed make file.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Better commenting and parameter naming.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Renamed methods to be more descriptive.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
This allows actual Shape components to be used instead of MockShapes, which is important for the benchmarks to get accurate results as Mocks are extremely expensive. It also removes a lot of unnecessary mock handling and test setup code.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Benchmarks and tests for Image and Constant GetValues
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Verify GetValues for Perlin and Random Gradients
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Standardized the assert format for GetValues().
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* More GetValues unit tests and test cleanup
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed typos
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* GetValues() unit tests for surface gradients.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Benchmarks for ShapeAreaFalloff Gradient
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added benchmarks for all remaining gradients and cleaned up the helper methods.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Renamed class for better report formatting.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added missing Mocks dependencies for the Editor tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
All of the component headers in the gem have been moved to the Include directory to make them public to other gems. This allows "upstream" unit tests and benchmarks to easily create real non-mocked-out versions of these components to do more integration-level and system-level testing and benchmarking.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add benchmarks to GradientSignal.
Cleaned up and rearranged a bit of the unit testing code to make it reusable from a benchmark suite as well. Added set of benchmarks for measuring GetValue(), so that we can compare against GetValues() when it gets added.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed Editor unit tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Final update copyright headers to reference license files at the repo root
Signed-off-by: spham <spham@amazon.com>
* Fix copyright validator unit tests to support the stale O3DE header scenario
Signed-off-by: spham <spham@amazon.com>
Mike Balfour
Esteban Papp
Steve Pham
alexpete