* Add comparison operators to SurfaceTagWeight.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed AddSurfaceTagWeight to always combine weights.
This simplifies the API a bit and defines the behavior if someone ever tries to add a duplicate tag.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added benchmarks for measuring the performance-critical APIs.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed SurfaceTagWeights to a fixed_vector.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add inPosition to AddSurfacePoint.
This will be used to detect which input the surface point is associated with.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add inPositionIndex to the appropriate APIs.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched Gradient Surface benchmarks to use actual surface components.
The gradient unit tests and benchmarks were previously using a mock surface data system, which led to misleading benchmark results. Now, the actual SurfaceData system gets constructed, and the tests use a mock provider, but the benchmarks use actual shape providers for more realistic benchmarking.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed unit tests to have better query ranges.
Half of each previous range was querying outside the surface provider's data.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* First attempt at removing SurfacePointLists.
This currently runs significantly slower than the previous code but passes the unit tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Another attempt at optimization.
This one runs faster than the previous, but still slow.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix the cmake dependency so that the gradient tests rebuild SurfaceData.dll when run.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switch SurfaceAltitudeGradient over to the new bulk API.
Also, optimized the non-bulk API by having it reuse the SurfacePointList to avoid the repeated allocation / deallocation cost.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched to using an indirect index so that all allocations are consecutive in our reserved buffer.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched back to SurfaceTagWeight again.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added runtime dependency to LmbrCentral for unit tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched code over to use the full EnumeratePoints in most cases.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added knowledge of max surface point creation into the system.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add generic GetSurfacePointsFromList API implementation for surface providers.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed implementation to use the correct maximum number of input points based on the surface providers being queried.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix out-of-bounds references on empty lists.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix memory allocation that caused benchmark runs to crash.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Starting to clean up the API.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Move SurfacePointList into separate files for easier maintainability.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed bug where too many points were filtered out due to using the position Z as a part of the AABB check.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Made FilterPoints an internal part of SurfacePointList so we can choose when and how to perform the filtering.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Final cleanup / comments.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added includes for non-unity builds.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Optimized GetValues() implementations.
Also consolidated GetValue() and GetValues() down to a single implementation under the covers for easier maintenance.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed how unit tests initialize the mock lists to try and fix the linux errors.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switch to explicit span declarations to help ensure this works with linux.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed compile error.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Make the bulk terrain APIs take in const Vector instead of non-const.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Optimize the surface data providers for bulk queries.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
The problem is that SurfacePoint doesn't have default values when constructed, and a few of the unit tests weren't setting m_position because the values weren't strictly needed for the test. However, the SurfacePointList checks them for validity and asserted when they couldn't be found, which was hit-and-miss due to it being uninitialized memory that was usually but not always 0xCCCCCCCC.
Improved the assert message and set the position values everywhere.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add comparison operators to SurfaceTagWeight.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed AddSurfaceTagWeight to always combine weights.
This simplifies the API a bit and defines the behavior if someone ever tries to add a duplicate tag.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added benchmarks for measuring the performance-critical APIs.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed SurfaceTagWeights to a fixed_vector.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add inPosition to AddSurfacePoint.
This will be used to detect which input the surface point is associated with.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add inPositionIndex to the appropriate APIs.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched Gradient Surface benchmarks to use actual surface components.
The gradient unit tests and benchmarks were previously using a mock surface data system, which led to misleading benchmark results. Now, the actual SurfaceData system gets constructed, and the tests use a mock provider, but the benchmarks use actual shape providers for more realistic benchmarking.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed unit tests to have better query ranges.
Half of each previous range was querying outside the surface provider's data.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* First attempt at removing SurfacePointLists.
This currently runs significantly slower than the previous code but passes the unit tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Another attempt at optimization.
This one runs faster than the previous, but still slow.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix the cmake dependency so that the gradient tests rebuild SurfaceData.dll when run.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switch SurfaceAltitudeGradient over to the new bulk API.
Also, optimized the non-bulk API by having it reuse the SurfacePointList to avoid the repeated allocation / deallocation cost.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched to using an indirect index so that all allocations are consecutive in our reserved buffer.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched back to SurfaceTagWeight again.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added runtime dependency to LmbrCentral for unit tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched code over to use the full EnumeratePoints in most cases.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added knowledge of max surface point creation into the system.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add generic GetSurfacePointsFromList API implementation for surface providers.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed implementation to use the correct maximum number of input points based on the surface providers being queried.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix out-of-bounds references on empty lists.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix memory allocation that caused benchmark runs to crash.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Starting to clean up the API.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Move SurfacePointList into separate files for easier maintainability.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed bug where too many points were filtered out due to using the position Z as a part of the AABB check.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Made FilterPoints an internal part of SurfacePointList so we can choose when and how to perform the filtering.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Final cleanup / comments.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added includes for non-unity builds.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed how unit tests initialize the mock lists to try and fix the linux errors.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed compile error.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
The benchmark builds weren't building the dependent DLLs due to missing dependencies in the cmake files.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Switched Gradient Surface benchmarks to use actual surface components.
The gradient unit tests and benchmarks were previously using a mock surface data system, which led to misleading benchmark results. Now, the actual SurfaceData system gets constructed, and the tests use a mock provider, but the benchmarks use actual shape providers for more realistic benchmarking.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed unit tests to have better query ranges.
Half of each previous range was querying outside the surface provider's data.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add comparison operators to SurfaceTagWeight.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed AddSurfaceTagWeight to always combine weights.
This simplifies the API a bit and defines the behavior if someone ever tries to add a duplicate tag.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Added benchmarks for measuring the performance-critical APIs.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed SurfaceTagWeights to a fixed_vector.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* First pass at encapsulating SurfacePointList.
The biggest challenge in optimizing SurfacePointList(s) usage is the overall memory management associated with it. There are M surface points with N surface mask entries created for every input point, which leads to a lot of container reallocation and memory shuffling when processing multiple input points. By encapsulating the list, it should become easier to preallocate the entries, as well as keep "helper data" around for managing the bookkeeping to associate the input points with the output points.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Small fixes and TODO reminders.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Encapsulate surface point creation and separate EnumeratePoints out from modifications.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Start removing SurfacePoint from the exposed API.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Changed SurfacePointList to split out the surface point storage to allow for span<> usage over time.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Removed entity id
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Removed SurfacePoint from SurfaceData, changed all remaining uses to AzFramework::SurfaceData::SurfacePoint.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Encapsulated SurfaceTagWeightMap and renamed to SurfaceTagWeights.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed make file.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Better commenting and parameter naming.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Renamed methods to be more descriptive.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Misc SurfaceData Optimizations.
This includes a few different optimizations found while trying to make the bulk query APIs faster:
* Switches mutexes over to shared_lock to optimize for the multi-reader-single-writer pattern
* Surface provider point creation now uses a pre-created set of masks to initialize with, and uses std::move() to move the created point into the output list instead of copying it.
* Splits CombineSortAndFilterNeightboringPoints so that the FilterPoints() can occur separately and efficiently with erase/remove_if, and avoids making a copy of the output points.
* Optimized SurfaceDataShapeComponent::ModifySurfacePoints
* Fixed potential bug where the sort wasn't stable since it only compared the Z value, and could have produced unexpected results for differing points with the exact same Z value.
* Fixed up a couple small bugs and missing checks in the unit tests
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed syntax on unit tests.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Add benchmarks and unit tests for GetSurfacePoints*.
The benchmarks are very enlightening - the existing implementation of GetSurfacePointsFromRegion (and GetSurfacePointsFromList) is currently measurably *slower* than just calling GetSurfacePoints() many times in a loop. This is due to all of the extra allocation overhead that's currently happening with the way these data structures are built.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Small syntax improvement
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Small update to the benchmark to use filtered results.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Removed accidental extra include.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Initial cleanup of GetSurfacePointsFromRegion in prep for bulk API support.
* Removed the generated lookup point from the output structure. Nothing was using it, and by keeping it separate, I can pass it in as a list of points that can be passed throughout the terrain, gradient, and surface data APIs.
* Clarified on the SurfaceProvider bus that GetSurfacePoints() only gets valid XY values on the inPosition.
* Simplified the TerrainSurfaceDataSystemComponent implementation a bit. The EnumerateHandlers() and the terrain Aabb checks were overkill. Also, the terrain Aabb check assumed that the Z value on the inPosition was valid, which it isn't always.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Remove CryCommon dependency.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Templates/Restricted upgrade/fixes:
Fixed template storage format: templates now only store true relative paths and no longer save "origin" paths and "optional" has been removed, it was never used.
Upgraded all templates to new standard
Template system now correctly handles child objects: Child objects no longer have to specify restricted they inherit from parent
Restricted now operates at the object level and makes no assumptions about parent
Restricted templates can now be combined and seperated on creation
ly_get_list_relative_filename has been deprecated for o3de_pal_dir
All Gems/Projects/Templates updated to use new code
Signed-off-by: byrcolin <byrcolin@amazon.com>
Replaced and removed the CryTimer (gEnv->pTimer). The new TimeSystem is a merger of the current time functionality found in the engine.
* Rename TimeSystemComponent.h/.cpp to TimeSystem.h/.cpp
* Adding New TimeSystem
* remove old timer cvars
* small improvements to the time system.
- updated parts to use the time conversion functions.
- in AdvanceTickDeltaTimes applying t_simulationTickScale is now uses doubles instead of floats.
* Replace gEnv->pTimer / ITimer usages with TimeSystem
* Updating usages of AZ::TimeMs{ 0 } and AZ::TimeUs{ 0 } to AZ::Time::ZeroTimeMs and AZ::Time::ZeroTimeUs
* red code the CryTimer
* using TimeUs instead of TimeMs is some cases + updating usages of old cvars to new
Signed-off-by: amzn-sean <75276488+amzn-sean@users.noreply.github.com>
When adding or modifying surface tags to a surface tag list asset, the surface tag lists didn't immediately refresh in the Editor. There were a couple of bugs in the way the tag assets were getting loaded and monitored that are now fixed.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
These are immediate dependencies, and include many circular dependencies, largely amongst the Atom gems, as indicated by cmake
Signed-off-by: AMZN-alexpete <26804013+AMZN-alexpete@users.noreply.github.com>
Many of these are just extra noise in the profile, but the one in Archive.cpp could also cause PIX to crash.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
This is the initial Terrain Gem. In this PR, it doesn't do anything, but it contains all of the initial code, icons, and build scripts for the gem to compile and build successfully. The follow-up PR will contain the first round of functioning code.
Also, with the creation of the gem, the TerrainSurfaceDataSystemComponent is getting relocated from the SurfaceData Gem to the Terrain Gem. This should have no impact, as that component has provided no active functionality in o3de. (It will start working again with the initial terrain system code in the next PR)
This also adds a couple of null guards to prefab code to prevent AP crashes, and fixed an incorrect service dependency in the VegetationSystemComponent that was exposed by moving the TerrainSurfaceDataSystemComponent.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
In preparation for a prototype Terrain Gem to get submitted, there are a few changes that are needed outside of the Terrain Gem as well:
The TerrainDataNotificationBus lives in AzFramework/Terrain, and needed to be extended to contain an optional OnTerrainDataChanged event to notify other systems when a terrain region has changed.
The HeightmapUpdateNotificationBus was removed, as this was a legacy file from the old already-removed terrain system.
The EditorWrappedComponentBase<> wrapper received a small optimization to ensure that ConfigurationChanged() is only called when the value of visibility actually changes. With prefabs, it appears that sometimes OnEntityVisibilityChanged could be called multiple times in a row with the same visibility value.
The TerrainSurfaceDataSystemComponent was updated to use the correct busses, and is ready to be moved to the Terrain Gem in a subsequent PR.
Signed-off-by: Mike Balfour 82224783+mbalfour-amzn@users.noreply.github.com
* Changed blue text to white that is not meant as a link, made 'View in Director' link work for gems in the inspector, added parsing for gem documentation link
Signed-off-by: nggieber <nggieber@amazon.com>
* Added documentation links for gems, changed markup for urls in summaries and requirements so they are clickable
Signed-off-by: nggieber <nggieber@amazon.com>
* Fixed a couple of the documentation links
Signed-off-by: nggieber <nggieber@amazon.com>
* Added documentation url to edit gem properties script and updated unit tests
Signed-off-by: nggieber <nggieber@amazon.com>
* [GHI 2178] Fixed missing vegetation info
The entity debug drawing culling system was removing it due to the level entity not having an AABB. Since this component can draw infinitely far, it just needed a max AABB.
With the culling fixed, it made another culling problem evident - a bug in the font code where it wasn't culling 3D text rendered behind the camera. Now it is.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fix problem with debug rendering not immediately showing up.
When using FloatMax for the AABB, it causes math overflows with the initial camera frustrum. Changing to max/2.0f is sufficient to avoid the overflows.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed normals on mesh raycasts.
The normals needed to be normalized after transformation, and didn't need the non-uniform scale applied to them, since they're normals.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Fixed the bug that prevented max-size AABBs from working with ShapeIntersection::Overlap.
Signed-off-by: Mike Balfour <82224783+mbalfour-amzn@users.noreply.github.com>
* Updated gem.json for all top-level Gems. All the top level gems now have identical gem.json formats based on the DefautlGem template gem.json. Two additional fields have been added, a type: field and a requirements: field. These fields are for display in Project Mananger. All gem.json files have a default requirements: value of None. Devs are responsible for providing requirements. Gem descriptions and tags have been signed off by developers.
Signed-off-by: Cronin <mikecro@amazon.com>
* Fixed minor formatting issues with RADTelemetry gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to QtForPython gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the Twitch gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to AWSCore gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the AtomTressFX gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the AudioEngineWwise gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the CertificateManager gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removing extra whitespace in summary of CrashReporting gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the CustomAssetExample gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removing extra whitespace in editorPythonBindings gem summary
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the ScriptedEntityTweener gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the Gestures gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Removing extra whitetspace in the summary of the GameStateSamples gem
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Adding newline to the end of the ExpressionEvaluation gem.json
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the ProjectManager PythonBindings.cpp code to reference the
newer fields in the gem.json files
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updating the Gem and Project templates gem.json files to include the
"type" and the "requirements" field.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Updated the default "requirments" field value to be empty string instead
of "None"
This works better with the ProjectManager GemInfoFromPath function.
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Correcting "summary" field name
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
* Added the requirements text to the AudioEngineWwise Gem
This gem requires downloading the Wwise 3rdParty library from AudioKinetic's website
Signed-off-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
Co-authored-by: lumberyard-employee-dm <56135373+lumberyard-employee-dm@users.noreply.github.com>
Co-authored-by: Mike Cronin <58789750+micronAMZN@users.noreply.github.com>
Mike Balfour
Chris Burel
SergeyAMZN
amzn-sj
Sergey Pereslavtsev
AMZN-byrcolin
sphrose
amzn-sean
AMZN-nggieber
Alex Peterson
Esteban Papp
Jeremy Ong
pappeste
Terry Michaels
Steve Pham
AMZN-Phil
lumberyard-employee-dm
Chris Galvan